GR86 Some pics of my work in progress.

Would you mind sharing the TPMS you got for your track wheels? also how do you find the swapping process. does the car happily switch over to the new sensors when you swap the wheels.
 
I got some universal ones that are cloned to the 4 sensors in the current OEM wheels. No faffing around. However, they do throw a tantrum when you're lugging around the track day wheels inside the car, as the car is seeing double TMPS :ROFLMAO:

Here are the sensors but you'll need to find someone with the AUTEL programmer to scan the OEM TPMS and write it to the universal sensors.

4pcs Autel MX-Sensor 315MHz+433MHz 2 in 1 Universal Programmable TPMS Sensor (Metal/ Rubber Value)

Autel MX-Sensor 2 In 1 (315 + 433MHz), as a programmable universal sensor featuring in Clamp-in and Snap-in options which are both smart and efficient specially built for sensor replacement with maximum application coverage, ease of use, OE-level fit, performance and reliability, will help users...
www.autelstore.co.uk www.autelstore.co.uk
 
ninjin said:
I got some universal ones that are cloned to the 4 sensors in the current OEM wheels. No faffing around. However, they do throw a tantrum when you're lugging around the track day wheels inside the car, as the car is seeing double TMPS :ROFLMAO:

Here are the sensors but you'll need to find someone with the AUTEL programmer to scan the OEM TPMS and write it to the universal sensors.

4pcs Autel MX-Sensor 315MHz+433MHz 2 in 1 Universal Programmable TPMS Sensor (Metal/ Rubber Value)

Autel MX-Sensor 2 In 1 (315 + 433MHz), as a programmable universal sensor featuring in Clamp-in and Snap-in options which are both smart and efficient specially built for sensor replacement with maximum application coverage, ease of use, OE-level fit, performance and reliability, will help users...
www.autelstore.co.uk www.autelstore.co.uk
Click to expand...
Thanks

I may just get these and install them, and worry about finding the right person at another time ;)
 
New wheels finally ready for shipping from Tokyo. Can't wait for 2025 track day season!
 

Attachments

  • IMG-20240914-WA0009.webp
  • IMG-20240914-WA0008.webp
  • Like
Reactions: Joolone
Been looking at tyres, 245/40 17. The Nankang CRS are so expensive here in the UK, around £250+vat a piece. Overseas they are like £200 a piece, so 5 for the price of 4.
 
Tyres sorted. Got some in HK which I can get shipped over for free in my friends container. Less than £200 a tyre in hk.

1000106042.webp
 
Got round to doing some work on the car today.... I had a gut feeling and it is true. The new 17x9 Enkei's wont clear the front Brembos. Got some 3mm spacers coming, hopefully its enough or will have to run 5mm.
 
ninjin said:
Got round to doing some work on the car today.... I had a gut feeling and it is true. The new 17x9 Enkei's wont clear the front Brembos. Got some 3mm spacers coming, hopefully its enough or will have to run 5mm.
Click to expand...
That’s surprising given the vast amount of clearance the AP CP9200 kit I have on has with both stock and wider, more dished aftermarket 8.5” wheels (all while keeping the stock dust shield too - the disk is not more inset than stock).

Is this the OEM Brembo kit or using Megane RS or something else entirely?
 
  • Like
Reactions: qajteq, JT99, Grblue86 and 2 others
You must log in or register to reply here.
Top Bottom
Back