-
-
ninjin replied to the thread GR86 GR86 - What wheels and tyres are you thinking about?.Consider the pirelli PZ5 as well. The Goodyear asy6 was a good tyre but pz5 has taken over the crown now. -
I could not win with them - they insisted that my BRZ had to be on the European database for emissions and, despite my pointing to the...
-
ninjin replied to the thread GR86 Full Frequency from Rear Speakers?.the newer C31s is a serious bit of kit for the money! I'll most probably give it a go at the weekend. If it doesn't fit where the C7...
-
ninjin replied to the thread GR86 Full Frequency from Rear Speakers?.well... I've gone down the rabbit hole now :LOL: Bought a PUZU C31s which is a 6ch DSP, with selectable inputs for the outputs. So I...
-
ninjin replied to the thread GR86 Sway bar.did you use a single washer or pack them out? I added washers above what Whiteline said to use.
-
ninjin replied to the thread GR86 Battery Dead after 1 night.Thx for the clarification, I always thought it switched off the keyless system on the car side.
-
ninjin replied to the thread GR86 Battery Dead after 1 night.If you dont already, when you lock the car, switch off the keyless sensor for the car. This saves a lot of battery usage. I used to have...
-
ninjin replied to the thread GR86 Car Security Install Experience.I was never sold by CANBUS security solutions. Creates more issues if the fitter is not experienced. So many stories of fried ECU's...
-
-
ninjin replied to the thread GR86 Importing my 2023 JDM BRZ.How did you get on with DVLA for the roadtax? My Alphard is classified as PLG too and being a Hybrid is way below the CO limit for £200...
-
ninjin replied to the thread GR86 Sway bar.could be the drop links coming loose. The threaded part is too short. Add some washers (to bring it out 3-4mm) to it before using the...
-
Just make sure you don't get it on any bare plastic, and wash it off afterwards as it's pretty savage (from what I've heard).
-
ninjin replied to the thread GR86 Some pics of my work in progress..yeah, I got some alcohol on the black tops of the rear lights, saw it start to eat.... luckily neutralised it before lasting damage.
-
Gtechniq 'W7 Tar & Glue Remover' will be your friend for the gummy strips. It's hard on gummy stuff, but soft on paint finish.
-
ninjin replied to the thread GR86 Some pics of my work in progress..After removing and destroying the TRD (replica) spoiler, can confirm the GT86 rear wing needs a lot of work.... Not looking to the...
-
-
ninjin replied to the thread GR86 Some pics of my work in progress..Blitz Power Con X installed and happy to report no Error codes or loss in power. :LOL: Fits onto and intercepts the Air Flow sensor...
-
-
-
Loading...
-
Loading...
