GR Yaris GR Yaris and oil pressure (in track use)

You realise that Toyota added an engine oil cooler with the Facelift?
So even Toyota thinks it needs an Oil Cooler. 🤷🏻‍♂️
It is not an oil cooler, Phil… even the rally 2 doesn’t have a front mounted oil cooler, it´s got a different sump, and bigger heat exchanger. Plus separate ones for cooling the gearbox (heat exchanger that is).

And the oil temps still get to 120s on spirited drives or on track on GR2 cars.
 
It is not an oil cooler, Phil… even the rally 2 doesn’t have a front mounted oil cooler, it´s got a different sump, and bigger heat exchanger. Plus separate ones for cooling the gearbox (heat exchanger that is).

And the oil temps still get to 120s on spirited drives or on track on GR2 cars.
Isn't it engine oil cooler on one side and gearbox oil cooler on other side for auto cars?
 
Isn't it engine oil cooler on one side and gearbox oil cooler on other side for auto cars?
the mk2 A/T has oil cooler but the engine cooler is water heat exhanger for all models, similar idea as with Airtec had already for mk1 a year ago or so.
Assuming mk2 has larger oil to water heat exhanger - might be interesting mod for mk1. There's one built mk1 for sale in Finland at the moment that has quite a bit larger water to oil heat exhanger installed.

04d9d3180e6bc2d3-large.webp

ce5e3ba5766b35cb-large.webp
 
Last edited:
So. Now i have some results to share.

Both are with:
- Rötheli Racing Oil Cooler Kit
- fully built Engine
- ~450hp
- Lamspeed Baffle Plates
- Motul 300V Racing 15W50

The results with lower overall oil pressure and more oil pressure droplets are from a Testday at Anneau du Rhin in April 2024.

The results with higher overall oil pressure and less oil pressure droplets are with our newly developed oil pan from the European Time Attack Challenge yesterday, October 2024.

In summary, the increase in oil pressure most likely is because the oil stays cooler, for longer due to much more oil volume and the less droplets are because it works quite nicely. 😁
And in both cases, oil pressure never drops below 1.75/2.0bar, which is good.

Here we go:
6D6E0EAA-B84B-41A5-807A-3F1C255A51C9.webp
E507E15E-5B35-4E05-BD2B-8171D09C0D32.webp
279B3BB6-5722-4647-B332-A74211D7BE2F.webp
4EF9E9BD-F82D-424A-960B-7DB994D5BA58.webp
 
So. Now i have some results to share.

Both are with:
- Rötheli Racing Oil Cooler Kit
- fully built Engine
- ~450hp
- Lamspeed Baffle Plates
- Motul 300V Racing 15W50

The results with lower overall oil pressure and more oil pressure droplets are from a Testday at Anneau du Rhin in April 2024.

The results with higher overall oil pressure and less oil pressure droplets are with our newly developed oil pan from the European Time Attack Challenge yesterday, October 2024.

In summary, the increase in oil pressure most likely is because the oil stays cooler, for longer due to much more oil volume and the less droplets are because it works quite nicely. 😁
And in both cases, oil pressure never drops below 1.75/2.0bar, which is good.

Here we go:
View attachment 32112View attachment 32113View attachment 32114View attachment 32115
Great results & info 👍 the capacity gain is the main one for me along with the Lamspeed baffles, for fast road and the odd track day the oil cooler may not be needed in my case.

Regards Russ.....
 
Taken delivery of the Rotheli racing larger capacity oil sump today.


20241224_120530.webp



A quality piece of engineering and design as expected from Phil , I said above, with the lamspeed baffles this is a must if your going the built engine route ,
I'm staying with the OE Toyota 0W - 20 grade oil, and stock oil cooler, feeding air to this cooler as others have already done, this will be blocked for fast road use, only used if I do the odd track day.

20241224_120437.webp
 
Taken delivery of the Rotheli racing larger capacity oil sump today.


View attachment 33153


A quality piece of engineering and design as expected from Phil , I said above, with the lamspeed baffles this is a must if your going the built engine route ,
I'm staying with the OE Toyota 0W - 20 grade oil, and stock oil cooler, feeding air to this cooler as others have already done, this will be blocked for fast road use, only used if I do the odd track day.
so you still have/want to use additional baffles? hard to judge from the picture, but the plates in the new pan could be indeed a bit larger...
 
why take heat out of the oil and put it into the coolant? why not have an aircooled oil cooler and not put more heat into the coolant?
 
With respect to the Rotheli sump & baffles, the additional capacity is key for me , the info is there with their own test results both stock oil pan and with their additional capacity pan, with pressure results etc, at the end of the day, you have to decide what works for you, for my application it's possibly over kill, I'll be sticking with the OW-20 oil, if I do a track day and it's driven hard, oil & filter change next week.

The same with the Denstoj rocker retainers, I'll be purchasing a set, to me why wouldn't you ? if the valve and cams are being changed your already in there?
I've never owned a car with a Turbo, heat management under bonnet is one of the key issues just from my own observations, there are some very clever people on this forum , I always say you need to try something yourself to see if it works for you, tyres , suspension, seating or engine mods, tuning etc, if it goes wrong it can be expensive but then you know.

Regards Russ....
 
the additional capacity is key for me
Additional oil capacity is not without its downsides...

I still had oil surge issues with lamspeed baffles, OEM sump and overfilling. It was better than before, but still an issue.
I had a new deeper baffled sump made (before Phil announced his, or I would probably have gone with that) which seems to have solved the surge issue, but now I’m marginal on oil temperatures again - that’s with a big Setrab oil cooler that was fine for extended track use with the normal sump.

I’m waiting for a vented bonnet to be installed to see if that helps… overheating is not a problem at every track, and depends on ambient temperature. I was at spa for two days in October, which must be about the hardest place in the world for amount of time running at full throttle - first day was cooler and no oil temp issues, second day was warmer and a race between AWD system and oil temperature to overheat (after 20-30 minutes to be fair). Backing off for a few corners or a lap brought the oil temperature back down quickly, so it's far from the end of the world.

Don't get me wrong - anything to address oil pressure is a step in the right direction. With a syvecs you realise how much of a problem it is on track, as it goes into limp mode at the slightest drop in pressure, but anyone tracking on a standard ECU will have absolutely no idea they have oil pressure issues until things suddenly get very expensive. And it's not related to power upgrades. Better to (maybe) have to deal with heat issues than an expired engine!

Just for completeness I have ~400bhp with a syvecs, A-cams and the standard turbo, and use 300V 5W40.
 
Those of you that found these oil pressure drops, were they ever significant enough to put the standard ecu in limp mode? If so did it store any codes?
 
Those of you that found these oil pressure drops, were they ever significant enough to put the standard ecu in limp mode? If so did it store any codes?
I haven't heard standard ECU causing any limps due to oil pressures as it has no built in safety for it. so its only hello world from Piston kind of alarm. This is kind of "no known issues" from Toyota as it logs no errors for it.
 
I haven't heard standard ECU causing any limps due to oil pressures as it has no built in safety for it. so its only hello world from Piston kind of alarm. This is kind of "no known issues" from Toyota as it logs no errors for it.
Interesting. Thanks for the feedback. I'll have to do further digging on my car.
 
BTW in recent Toyota technical magazine it states that there would be integrated oil baffle in sump but to my understanding there is not. so not that accurate detail in that sense.
 
BTW in recent Toyota technical magazine it states that there would be integrated oil baffle in sump but to my understanding there is not. so not that accurate detail in that sense.
I believe they are referring to the anti-churn baffle. It may prevent oil splashing by the balancer shaft, but it is unlikely to have any effect on oil sloshing during high G braking.

baffle.webp
 
Back
Top