GR86 What extended wheel studs and spacers to choose? (help me spend money)

Mr_Hansen

Absorbed member
Joined
Feb 20, 2024
Messages
49
Reaction score
95
Location
Denmark
Okay, bit of a boring thread, but hear me out, and help make a decision so that I can spend my hard earned cash on something better than our new (used) Skoda Enyaq :LOL:

I'm going get KW V1 coilovers installed on my GR86 and drop the ride hight approximately 1 inch (25 mm) from stock.

Along with this my plan is to get extended wheel studs installed, to get the desired stance on both my winter wheels (on OEM rims) as well as for my summer set (OZ Leggera rims). Everyone seems to swear to ARP extended studs, but they seem to be quite expensive in Europe, and I would be happy with something else, as long as they are from a reputable brand. I would use open ended lug nuts on the summer setup.

The fitment that I'm after is the following:
  • Summer setup:
    • Rim: OZ Leggera 18x8 +45
    • Spacer: 12 mm slip on spacer on each wheel
    • Combined difference from stock: Outer edge of the rim will be 21.4 mm further out than stock
  • Winter setup:
    • Rim: OEM 18x7.5 +48
    • Spacer 20 mm slip on spacer on each wheel
    • Combined difference from stock: Outer edge of the rim will be 20 mm further out than stock
Eibach only seem to have 5 and 10 mm slip-on spacer/stud packages, as well as bolt-on spacers (which wont work for me as bolt-on cant be used for a spacer smaller than 15 mm) with TÜV approval (and in general for that size), while H&R have 24 mm and 30 mm slip-on spacer/stud packages with TÜV.

H&R does seem to have this set (though it doesn't come up as an approved set for the car), which is 20 mm slip-on spacer with included extended studs, all in the correct size I think: https://www.h-r-shop.com/h-r-wheel-spacers-5x100-56-drs40-20mm-p-581174.html

As I see it, I have the following options:
  1. Go ARP extended studs (3 inch), and stand-alone slip-on spacers. I've found these:
  2. Go with the H&R set off 20 mm slip-on spacers and extended studs and find a 12 mm stand-alone spacer for the summer setup
If anyone has experience with extended studs and spacers and know of any proper brands or products easily available in Europe, I would really appreciate it!
Picture of the summer wheels to spice the wall of text up a bit:

DSC_3322.webp
 
I have a similar quandry!! So interested in this..
 
I installed the ARP 3" studs and running some 10mm spacers I bought from Germany. I'll update with their brand later.
I do have ARP 2.75" for sale. Need to dig them out.
 
You only do it once, so do it properly with ARP. Mine are sitting on the worktop awaiting to be done.

Problem with the non ARP studs, is that many specifically say do not use the stud installation tool, which you pull the stud tight from the hub face.

s-l1600.webp


With access being an issue to get them air hammered in from the rear, I thought the extra few £s was worth it just for ease of install with the ARP.
 
Okay, bit of a boring thread, but hear me out, and help make a decision so that I can spend my hard earned cash on something better than our new (used) Skoda Enyaq :LOL:

I'm going get KW V1 coilovers installed on my GR86 and drop the ride hight approximately 1 inch (25 mm) from stock.

Along with this my plan is to get extended wheel studs installed, to get the desired stance on both my winter wheels (on OEM rims) as well as for my summer set (OZ Leggera rims). Everyone seems to swear to ARP extended studs, but they seem to be quite expensive in Europe, and I would be happy with something else, as long as they are from a reputable brand. I would use open ended lug nuts on the summer setup.

The fitment that I'm after is the following:
  • Summer setup:
    • Rim: OZ Leggera 18x8 +45
    • Spacer: 12 mm slip on spacer on each wheel
    • Combined difference from stock: Outer edge of the rim will be 21.4 mm further out than stock
  • Winter setup:
    • Rim: OEM 18x7.5 +48
    • Spacer 20 mm slip on spacer on each wheel
    • Combined difference from stock: Outer edge of the rim will be 20 mm further out than stock
Eibach only seem to have 5 and 10 mm slip-on spacer/stud packages, as well as bolt-on spacers (which wont work for me as bolt-on cant be used for a spacer smaller than 15 mm) with TÜV approval (and in general for that size), while H&R have 24 mm and 30 mm slip-on spacer/stud packages with TÜV.

H&R does seem to have this set (though it doesn't come up as an approved set for the car), which is 20 mm slip-on spacer with included extended studs, all in the correct size I think: https://www.h-r-shop.com/h-r-wheel-spacers-5x100-56-drs40-20mm-p-581174.html

As I see it, I have the following options:
  1. Go ARP extended studs (3 inch), and stand-alone slip-on spacers. I've found these:
  2. Go with the H&R set off 20 mm slip-on spacers and extended studs and find a 12 mm stand-alone spacer for the summer setup
If anyone has experience with extended studs and spacers and know of any proper brands or products easily available in Europe, I would really appreciate it!
Picture of the summer wheels to spice the wall of text up a bit:

View attachment 35053

There is a very good custom shop in the UK, I'm sure they can send to you in Denmark. I had them custom fabricate 5mm spacers with OEM hubcentric 56.1mm inside and 75mm Enkei fitment on the face. Everything was confirmed with CAD drawings and the price was a very reasonable £105 for 4.

sapcer.webp


 
I have a similar quandry!! So interested in this..

On the subject of wheel related quandaries it would be good to have some sensible feedback on actual real world width, offset and tyre sizing which gives a decent aggressive look but doesn’t require mangling rear arches or running silly levels of camber all round to aid clearance.

Most of the American’s seem to have stuffed 255 width tyres on, ground arch material out and run negative 3 or 4 degrees of camber. I can only imagine all of which drives horribly unless you’re planning on having the car on the limit on a track for the majority of its use.
 
On the subject of wheel related quandaries it would be good to have some sensible feedback on actual real world width, offset and tyre sizing which gives a decent aggressive look but doesn’t require mangling rear arches or running silly levels of camber all round to aid clearance.

Most of the American’s seem to have stuffed 255 width tyres on, ground arch material out and run negative 3 or 4 degrees of camber. I can only imagine all of which drives horribly unless you’re planning on having the car on the limit on a track for the majority of its use.
This site seems to cover most wheel sizes and tyres.

 
Thank you all for your replies!
@ninjin are you going to install the ARP studs yourself? I would have a workshop do it (along with the coilovers) and after seeing videos of the install (of the 3 inch) some seem to unattach the rear hub all together, while other seem to manage without. Is it a simple thing that they can't mess up?

Alternatively I could go with 15 mm bolt on spacers instead (20 mm for the winter setup), but I'm afraid of rear rubbing with a setup of effectively 18x8 +30 (a rim of 18x8 +45 and a spacer of 15 mm), with the drop of around 1 inch..
 
On the subject of wheel related quandaries it would be good to have some sensible feedback on actual real world width, offset and tyre sizing which gives a decent aggressive look but doesn’t require mangling rear arches or running silly levels of camber all round to aid clearance.

Most of the American’s seem to have stuffed 255 width tyres on, ground arch material out and run negative 3 or 4 degrees of camber. I can only imagine all of which drives horribly unless you’re planning on having the car on the limit on a track for the majority of its use.
Some of the American cars do look really cool but they are just show ponies. They aren't usable. If driven hard on or track it would just end up being really awkward like this...

 
Thank you all for your replies!
@ninjin are you going to install the ARP studs yourself? I would have a workshop do it (along with the coilovers) and after seeing videos of the install (of the 3 inch) some seem to unattach the rear hub all together, while other seem to manage without. Is it a simple thing that they can't mess up?

Alternatively I could go with 15 mm bolt on spacers instead (20 mm for the winter setup), but I'm afraid of rear rubbing with a setup of effectively 18x8 +30 (a rim of 18x8 +45 and a spacer of 15 mm), with the drop of around 1 inch..
I will be doing it myself, as with all the work carried out on my car. I'm ex-trade so the works are not an issue for me.

If you are not used to working on a car, then it maybe better to pay a workshop to do it for you.

I run standard 18" wheels with 20mm spacers and no issues. Lowered around 35mm too. Hope this gives you some reference to what you can get away with spacers.
 
Back
Top