GR Yaris (Gen 2) sha256's GR Yaris Mk2

sha256

Dedicated member
Joined
Mar 14, 2024
Messages
112
Reaction score
156
Hey, I'm sha256 from Lithuania. This will be "home" for my Yaris journey :)
Ordered GR Yaris Mk2 in April 2025 and finally received in this Saturday. White pearl, EA30 interior, Automatic, Premium Spec.
I ordered it without any test drive or even seeing one in real life - solely based on the internet hype arounf mk1. Only drove 110km so far an I like it a lot.

I've sold my 2003 blobeye WRX STI this year and this kind of replaces it and will also replace my 17 year old Lexus IS250 as a daily driver. Lexus is still going strong, but It started to show it's age.

First impresions:
  • It's stiff, way stiffer than my STI on coilovers, very little body roll
  • Ride is not harsh, just about perfect for me
  • I couldn't believe how good it goes through bends, nothing like my old STI, suspension improved a lot over the last 20 years
  • Noise isolation is close to non-existent, blasting music helps a bit

So far I'm gonna do the following:
  1. Change OEM wheels to winter wheels and tyres
  2. Change number plate frames from to non-dealer ones (no free marketing)
  3. PPF front, sides and some plastic parts that are prone to scratches
  4. Spray underside and some rust-prone suspension parts with Innotec Hi-Temp Wax to prevent rust over the winter (we have a lot of salt on roads during hte winter)
  5. Do some easy miles until I hit 1000+ kilometers and do an oil change at the dealership

Until I get the winter wheels fitted and rust-proofing done, it will sit in my tiny old garage :)

IMG_0912.webp
 
Decided to get some cheaper wheels for winter: JR SL01 18x8 ET40 and some cheap Nankang tyres with soft rubber.
IMG_0860.webp


Tried to test-fit the wheel today and it does not clear the break caliper :| I was really hoping that for once this would be a bolt-on, but nope, I wasn't lucky. It looks like adding 4-5 mm spacer would clear the caliper by 1-2mm but I think that's very close. I'd add fatter spacers, but the OEM wheel studs are incredibly short. I knew they were short, but damn, it's really really short.

I'm a bit puzzled on what to do about this wheel fitment situation. I can no longer return the wheels because return window closed some time ago, I really like them and wish to make it work somehow. Don't want to change the OEM studs for longer ones, so I think I'll go with 15mm spacers from Japan Racing which will solve both problems: clear the break calipers and studs will be long enough to safely bolt the wheel to the hub. They're pricey (67Eur each), but TUV certified and I'm only planning to run them for winter.

Any advices on weather I should go with 5mm spacers which will kind of clear the calipers or 15mm spacers?

Also ordered conical 60deg Rays Formula 2 nuts from Japan for these wheels, I though I'd treat myself :D
 
I've decided to go with 5mm spacer in front to clear the breaks and use some special lug nuts from H&R that should give me 14mm thread engagement in the front which is not the best but it will do. Bought some generic lug nuts to see how much turns I get. In the front only ~6 turns or ~9mm thread, which is not great, but that should be fine to just drive the car to a shop to get PPF done and park it back in the garage. It will sit there until I get the H&R lug nuts. No problems in the rear, I got maybe 11 turns. Thank you @tonic for advice on the lug nuts!

IMG_0922.webp


IMG_0923.webp


IMG_0924.webp


IMG_0925.webp
 
I bought some of those in black, I was a abit surprised they just send all 20 in a box loose so weren't looking new by the time they made the journey from Italy to the UK, but not the end of the world they'd hardly look new for long I suppose anyway, they did arrive fairly quickly though, I got around 11 turns all round with the OZ alloys I bought
 
I bought some of those in black, I was a abit surprised they just send all 20 in a box loose so weren't looking new by the time they made the journey from Italy to the UK, but not the end of the world they'd hardly look new for long I suppose anyway, they did arrive fairly quickly though, I got around 11 turns all round with the OZ alloys I bought
Awesome! I'm glad to hear this, I hope it will solve the issue for me too.
 
Thanks for the suggestion. The problem with all of these replicas is the skirt diameter: 15.7mm while H&R's is 14.7mm. The hole diameter in most wheels (mine included) is 15mm and those replicas will not fit and will need some filing down.
I am running them on my Braid wheels with no problem. The skirt is smaller on the H&R though.
 
Sourced a set of H&R nuts. Wasn't cheap, came individually packed too for some reason. Will try to replace the current ones I'm using once I get the car back from PPF wapping.
IMG_0936.webp


Also received the Rays FN2 from Japan which I will not be able to use on Yaris 😞

IMG_0935.webp
 
Fitted H&R nuts. Got ~8 turns and I think that should be good enough.
 
Did some rustproofing today. Prep time 2 hours, spraying wax around 10 minutes. I did not bother with removing fender liners and other stuff and trying to cover everything with a layer of wax. Removed only two big peaces of plastic in the middle. All seams looked very well sealed by toyota already.

My main focus was to cover all suspension parts that were only sprayed by a thin layer of black paint. After first winter all of these parts will be covered in rust without rustproofing. Hopefully if will look much of the same in the spring :)
IMG_0955.webp

IMG_0957.webp

Also, removed the yaris badge, it did not seem right to have it on.

IMG_0956.webp
 
Winter floor mats from PrimeEVA. Discount code if someone wants to buy it too, fits nicely.
IMG_0959.webp

IMG_0960.webp
 
Started to use GRY as my daily today and TPMS stopped working for some reason. It won't pick up the sensors and just shows "Malfunction. Visit your dealer" when I try to register them as a new set. Worked just fine a week ago, perhaps parking for a few weeks did deplete the batteries somehow 🤷
 
TPMS started working on it's own again 😁
 
Decided to get some cheaper wheels for winter: JR SL01 18x8 ET40 and some cheap Nankang tyres with soft rubber.


Tried to test-fit the wheel today and it does not clear the break caliper :| I was really hoping that for once this would be a bolt-on, but nope, I wasn't lucky. It looks like adding 4-5 mm spacer would clear the caliper by 1-2mm but I think that's very close. I'd add fatter spacers, but the OEM wheel studs are incredibly short. I knew they were short, but damn, it's really really short.
Hi, this is really interesting... Soon I'll receive gen 2 as well and we were looking for nice wheels for winter tire set. Earlier today I've contacted Japan Racing directly in regards to SL03s and JR3s, if 8x18 ET40 would fit without a need for spacers. They replied that they have mounted
SL01s 18.8.5 ET40 with no issues so SL03s or JR3s with ET40 should be fine as well... Now looking at your post where clearly they cant clear the brake calipers I am getting really lost :D
 
SL01s 18.8.5 ET40 with no issues so SL03s or JR3s with ET40 should be fine as well
There is a difference, my SL01s are 18x8.0 ET40. I think that wider rim would clear the front breaks by 3-5mm. With 5mm spacer 18x8.0 clears the breaks by ~3mm. I did not want to buy wide winter tyres so I went with a narrow rim 🙂
 
There is a difference, my SL01s are 18x8.0 ET40. I think that wider rim would clear the front breaks by 3-5mm. With 5mm spacer 18x8.0 clears the breaks by ~3mm. I did not want to buy wide winter tyres so I went with a narrow rim 🙂
Yep same, I want to keep it in 18x8 as well
 
Back
Top