GR Yaris (Gen 2) Armijs GR YARIS MK2

[Armijs]

Would you know the Schrader part number as well as I can't find the GR Yaris on the Schrader website.

Sure, no problem:
Schrader: SCHR2200
Bosch: F026C00468
Hamaton: HAM-HTS-A68BA
Hella: 6PP358139-471

All that fit for a Toyota GR yaris, all must be hand programmable off course before car recognizes them.

 

[Armijs]

@Armijs another question, sorry to bother you so much. I'm getting my GRY soon and I want to decide on this.

Are you able to do a month-in review of the Primeeva mats? Have you cleaned them already? Can we get a photo of whole interior from a distance to asses how red stitching fits the black-red interior? Thanks.

Here you go:

And Keylan Polyurethane mudflaps were just ordered from MFF in Japan, total cost till now, 382 EUR, still to be paid TAX and VAT when importing.
But i really did not want regular PVC ones especially in the cold.

 

[Ecsrobin]

Here you go:

View attachment 31506
View attachment 31507
View attachment 31508
View attachment 31509

And Keylan Polyurethane mudflaps were just ordered from MFF in Japan, total cost till now, 382 EUR, still to be paid TAX and VAT when importing.
But i really did not want regular PVC ones especially in the cold.

Have they released them now? I had a message to say they’d contact me when ready but nothing since.

 

[Armijs]

Have they released them now? I had a message to say they’d contact me when ready but nothing since.

It is also live on the page : MFF
If you want regular PVC, just order from link, if Kaylan, then just write them again.
And also 4 pieces GR stickers, which they say cant be attached to Kaylan, but we will see.

Just got this back from them, they are really quick:

When i had the Orange FF ST, i already had Kaylan urethane Mudflaps from Rallyflapz, and they were superb in cold weather, really kept their elasticity, so no research needed for me

 

[Inversed]

I ordered normal ones for me and my friends. Climate here is not too bad, rarely under 0 during the day, hopefully they will be fine.

I also haven't received email from MFF, went on site and saw they are available. Normal ones come to about 260€ with shipping to EU after import taxes will be paid. I asked for some discount because we ordered 3 sets.

Quite shocking that they require 15-18 day to ship them.. normal ones plain. Hopefully it will be a bit faster.

 

[janislavs]

...just a few things left so i am happy with the car, mudflaps and exhaust.

Btw, which exhaust are you planning to get? Have you found any Gen2 compatible exhausts yet?

 

[Armijs]

Btw, which exhaust are you planning to get? Have you found any Gen2 compatible exhausts yet?

Checking weekly, other than Milltek that have cooperation with Toyota, none other are there yet as far as i know, i dont want Milltek as i want the electronic valve.

I liked the Australian i think X-Force one for MK2, price was good, it was full length, and electronic Valve, i mentioned it previously in this thread you can go back a bit, with video and all.

 

[Armijs]

Anyway, mounted the tyres and TPMS on the new Braids, tomorrow will coat them for easier cleaning, will be mounting them on the car in two weeks just before leaving for Poland.

Got cheapest tyres i could find, just for the trip to the very bottom in Poland for the mountains, if there will be snow.

Then i had spare time, i polished the tips for the first time, used to do it often back when i had the Ford Focus Mk2 ST with a Cobrasport exhaust.

Best polisher, used it years back on the Focus as well.

Later this evening doing anti corossion coating prepare work on cousins Rav-4 Plugin, then tomorrow doing the coating it self.

Busy weekend

 

[Dave9202]

Sure, the mats should be a sure thing for the MK1, not sure about MK2, but they should arrive around august 21, then i will post pictures and a review.

Link for GR Yaris here: Prime Eva

He is primarily based in Latvia, and i guess his company does contract work all around the world, but i dont think it would be usefull for you, for me it was simple local and quick, if he has to go abroad it would be much cheaper for you to do it locally. He works with various wrap material suppliers that already have kits cut out for GR yaris though, as a set for all the vulnerable areas though, and just this week front facelift bumper was already available so he didnt have to custom make it, and i also had him wrap the headlights so they are not mated after a year from all the dust and the debree on our dirty roads:

View attachment 30177
View attachment 30178


In other news, things i did today on the Yaris but i did not take pics yet:
Exchanged the number plate lights to leds
Changed the valve caps to nice aluminum GR themed caps, from cheap plastic ones
Tried on the wireless charger for the phone i got, as this model has wireless android auto, it fits perfectly, will just have to add a hidden plug for the charger underneath the panel somehwere so no wires are visible

More pics tomorrow as i start work on the undercoating

I just cant wait for the day i will be able to start daily driving it... soon.... after undercoating, and ceramic coating the body and the wheels

Do you know what software your PPF supplier was using for the pre-cuts? I have a supplier here in the UK but suggests the cuts haven’t been released yet so would have to do it individually.

 

[Armijs]

Do you know what software your PPF supplier was using for the pre-cuts? I have a supplier here in the UK but suggests the cuts haven’t been released yet so would have to do it individually.

I asked him who supplied what, if he chooses to answer he will, but i cant guarantee anything.

Ceramic coated the wheels today. Probably not much else to say either until i put all the wheels on the car and make pics or the mudflaps arrive.

 

[Inversed]

Do you know what software your PPF supplier was using for the pre-cuts? I have a supplier here in the UK but suggests the cuts haven’t been released yet so would have to do it individually.

Xpel pre-cuts are available for a long time already.

 

[Armijs]

Do you know what software your PPF supplier was using for the pre-cuts? I have a supplier here in the UK but suggests the cuts haven’t been released yet so would have to do it individually.

Well my buddy said this:

The kit comes from Xpel DAP, some patterns have been modified manually in the software for easier installation.

The pre-cut kits for a '24 GR Yaris are available on Car Pro ImmortalCut and Solarscreen Protector paint protection film softwares as well

And i quote, if multiple people from the same country want to have their cars wrapped he can fly out, forms are available to wrap the whole car.

 

[Dave9202]

Deleted. - I found my answer in the below redirection

 

[GR-Admin]

@Dave9202 and @Armijs for the risk of de-railing your thread it's probably best to give your thoughts on the thread below.

GR Yaris - Are these engines really this fragile?

I find it hard to believe that all GRY/GRC engines have this issue and could fail catastrophically at any moment, even in stock form, while using the highest grade oil and fuel. Thoughts?

www.gr-zoo.com

 

[Chris_P_Bacon]

Checking weekly, other than Milltek that have cooperation with Toyota, none other are there yet as far as i know, i dont want Milltek as i want the electronic valve.

I liked the Australian i think X-Force one for MK2, price was good, it was full length, and electronic Valve, i mentioned it previously in this thread you can go back a bit, with video and all.

ACME have had a Stratodesign system on their socials but it looks expensive!!!! But very nice!!

 

[Armijs]

@Dave9202 and @Armijs for the risk of de-railing your thread it's probably best to give your thoughts on the thread below.

GR Yaris - Are these engines really this fragile?

I find it hard to believe that all GRY/GRC engines have this issue and could fail catastrophically at any moment, even in stock form, while using the highest grade oil and fuel. Thoughts?

www.gr-zoo.com

Hey Admin, i did not have anything to say much really in particular, as i have not had the car for long, but i put something down anyway.

 

[Armijs]

ACME have had a Stratodesign system on their socials but it looks expensive!!!! But very nice!!

Well, i wrote to them, but looks to only be a GPF-Back, and does not seem to be with an Valve, but will wait for info back from them.

 

[Ecsrobin]

It is also live on the page : MFF
If you want regular PVC, just order from link, if Kaylan, then just write them again.
And also 4 pieces GR stickers, which they say cant be attached to Kaylan, but we will see.
View attachment 31510

Just got this back from them, they are really quick:

View attachment 31511
When i had the Orange FF ST, i already had Kaylan urethane Mudflaps from Rallyflapz, and they were superb in cold weather, really kept their elasticity, so no research needed for me

Thanks for the link ordered plain black today. PVC fine for me as never gets cold.

 

[Armijs]

ACME have had a Stratodesign system on their socials but it looks expensive!!!! But very nice!!

Well here is the cost of it.

They are a people of few words, no further information, they just asked for email and adress for invoice, did not go into any pesky details about my questions, like at all

The whole correspondance is here:

 

[Armijs]

Today was the day that i finally fitted all 4 wheels, TPMS worked straight away without any issues, on the first braking turn though on the test drive i FELT the difference in handling and Grip compared to OEM fitted tyres, MUCH more different, more jelly like, grip more softer and worse, have to be more mindfull from now on and be somewhat slower and not so rash.

But i gotta say, i guess i prefer the overall look more with the White Braids than OEM black ones.