GR86 TRD short shift kit

GRpirate

Obsessed member
Joined
May 1, 2022
Messages
244
Reaction score
404
Location
Hampshire
Hi All.
Has anyone fitted one of these short shift kits as stocked at Fensport. Intrested on any feed back as it may be something I am interested. I couldn’t find any mention of it on here so apologies if it’s been covered.

And while I am at it happy Christmas and thanks to all for making the forum so friendly unlike a lot of others.
 
Hi All.
Has anyone fitted one of these short shift kits as stocked at Fensport. Intrested on any feed back as it may be something I am interested. I couldn’t find any mention of it on here so apologies if it’s been covered.

And while I am at it happy Christmas and thanks to all for making the forum so friendly unlike a lot of others.
I don't have it (it's something I do want to get) but based of previous experience it'll make the shifting feel a little stiffer and heavier ("Direct" as some people say).

Also, not sure if you know but you need to get be able to get under the car to install it as well.

 
I don't have it (it's something I do want to get) but based of previous experience it'll make the shifting feel a little stiffer and heavier ("Direct" as some people say).

Also, not sure if you know but you need to get be able to get under the car to install it as well.


Thanks Benji that’s some good info. Seems a bit of hassle. Not sure I would take that guys view on it as being worthwhile. He always struck me as a one of the fast and furious crowd. The shift is very good as standard so I feel I need a bit of reassurance. You should go ahead with it and if it’s a bit crap I will be here to give you my shoulder to cry on😉
 
Thanks Benji that’s some good info. Seems a bit of hassle. Not sure I would take that guys view on it as being worthwhile. He always struck me as a one of the fast and furious crowd. The shift is very good as standard so I feel I need a bit of reassurance. You should go ahead with it and if it’s a bit crap I will be here to give you my shoulder to cry on😉

Ha, no worries and I know what you mean :D. I was hoping to go down to Fensport and get them to fit it themselves later in the year as I'd like to get the TRD gearbox mount from the old 86 fitted as someone on here recommended it for helping with the jankiness of the shifts.
 
I have the billetworkz one installed along with the US market GR weighted knob, mtec springs and powerflex mount bush. Made a huge improvement to the shifting feel. Highly recommended.
 
I have the billetworkz one installed along with the US market GR weighted knob, mtec springs and powerflex mount bush. Made a huge improvement to the shifting feel. Highly recommended.
Thanks Stig sounds good
 
Any further reviews on any short shift kits? Wouldn’t mind a shorter and more direct throw, I’m not expecting Civic Type R or Porsche but it’s a bit ‘spongy’ I think
 
Any further reviews on any short shift kits? Wouldn’t mind a shorter and more direct throw, I’m not expecting Civic Type R or Porsche but it’s a bit ‘spongy’ I think
If you're looking for ways to tighten up the shift feel, I can recommend replacing the transmission mount with the stiffer TRD part. Of, if you want to save some money, just use a poly insert for the bush in the current mount.

Post in thread 'What did you do with your GR86 today' https://www.gr-zoo.com/threads/what-did-you-do-with-your-gr86-today.805/post-78828
 
Thread bump but I was thinking about short shifters recently and had a little nose around Black Friday deals. Blackhawk Japan have the TRD short throw shifter (from the FT video further up) on sale at the moment, so I've decided to give it a try...came to £203 inc. shipping, and I expect there'll be import fees. But even so, it works out much cheaper than UK suppliers (even with their BF sale, Fensport would still be £319 for the same part). I don't mind waiting a few weeks to save myself probably 70 quid or so.

I'm not expecting a huge reduction in shift throw (it's already quite short), but I've read that it makes the shifter feel quite a bit tighter and more precise. Think the stock one feels a little loose sometimes, so I'll be happy if it just ends up being one of those "OEM+" sort of mods. I was thinking about the Billetworkz shifter, with a bigger reduction, but I don't think I've read a single testimonial which doesn't complain about rattling noises from it. Will report back when it arrives and I get it fitted.
 
Thread bump but I was thinking about short shifters recently and had a little nose around Black Friday deals. Blackhawk Japan have the TRD short throw shifter (from the FT video further up) on sale at the moment, so I've decided to give it a try...came to £203 inc. shipping, and I expect there'll be import fees. But even so, it works out much cheaper than UK suppliers (even with their BF sale, Fensport would still be £319 for the same part). I don't mind waiting a few weeks to save myself probably 70 quid or so.

I'm not expecting a huge reduction in shift throw (it's already quite short), but I've read that it makes the shifter feel quite a bit tighter and more precise. Think the stock one feels a little loose sometimes, so I'll be happy if it just ends up being one of those "OEM+" sort of mods. I was thinking about the Billetworkz shifter, with a bigger reduction, but I don't think I've read a single testimonial which doesn't complain about rattling noises from it. Will report back when it arrives and I get it fitted.
I'd quite like to install a short shifter, but I temporarily quashed the idea because I already feel like I'm shifting quicker than the rev hang allows. By this I mean that I have the gear selected already, but I'm waiting for the revs to drop before releasing the clutch.

I'm interested to hear your thoughts, and how you get along with it. Those billetworkz or similar shifters look really tactile and sweet to use, but I've also read that people end up with annoying rattles.
 
Took a while for Blackhawk to dispatch it, but it finally shipped early on Wednesday morning, and then arrived today and is now fitted. I ended up having to pay a little more of an import fee (£57) than I'd hoped, bringing the total cost to ~£260.

Fitting wise, it is a little fiddly, but it can be done from inside the car without having to jack it up. Took me about 1.5 hours going slowly and methodically. The instructions in the FT video above are pretty much spot on; the only difference I would say, apart from being able to do it from above, is that it is probably easier to remove the rubber boot the opposite way from how he did it, and similar for reverse - when removing, I followed the video, and managed to tear the old boot slightly, but was still able to expose the linkage to disconnect it, then withdrew the whole shifter with the boot attached. When refitting the new one (it comes with a new boot), I found it easier to get the rubber around the linkage itself first, push the new shift lever into position and hook it up, then pull the boot back along the linkage and over the bottom of the connection with a pair of pliers and a small screwdriver. Just be careful not to yank it around too much and tear it. This was by far the only really difficult bit of the install - the rest is just trim removal and refitting. Oh and you will need a decent set of circlip pliers.

Verdict - this is not a massive improvement, but it is still noticeable. There is only a 10% reduction in throw, which means in the comparison video I took below, you can't really tell much difference. However, the shift action does feel nicer to me:
- The lever slots into each gate with a more satisfying mechanical feeling, a more positive feeling engagement
- It is certainly quicker to manipulate around the gate.
- It feels like the gear level might have slightly less side-to-side play than before, but I am not convinced, and can't see how that would be the case without changing something in the gearbox or linkage itself (such as stiffer MTEC return springs).
- There's a slightly heavier shift action, but that doesn't bother me because I'm not a wimpy girly-man (he is - Ed.).

Whether it's worth the cost and effort:
- If you are after a significant reduction in shift throw, then probably not. For that, you would probably be better off going for the Billetworkz kit, as it's probably not that much more expensive and offers a 33% reduction. However, consistent reports of rattling from those kits put me off, and that's something that would bother me, and it would be a pain to have to try and refund it to the US. There's also the risk that that much reduced throw might make the shift effort a lot higher, which might be more irritating.
- If, however, you're a bit of an idiot likes me who doesn't mind spending a bit too much more on subtle improvements to make things just "OEM+", then it's probably ideal. For me, the improvement in feel is more noticeable than the reduction in throw, and I don't feel too short changed, even having spent £260 on it - it just rounds off the car nicely and makes the already good shifter just a bit better. But I don't think I'd bother spending much more on it (think you're looking at around £320 from UK vendors).

I try to be objective about stuff and not too "omg guys, best thing evar!!!1!!1!!one!!", or fall into the trap of saying something is great to justify the time and effort doing it. So hopefully that's helpful.

Below is a comparison of stock vs. TRD, but as I said, it's difficult to convey such a minor improvement.

 
Had this installed today, similar experience with black hawk as above but arrived pretty quickly.
First impressions are that I'm really impressed, having read this thread I wasn't expecting such a big difference. But really enjoying the difference in shift feel and precision. Making an already enjoyable gear change a good bit better. Still using my billetworkz knob.
 
Last edited:
Back
Top