GR Yaris Review - HEL Engine Oil Cooler Kit - C-Tec

[jerseyjackson]

Havent seen such before, thought all AN connectors used crush washers?

https://auto.helperformance.com/an10-low-profile-swivel-banjo-adapter-with-an8-hose-end-fitting-includes-an10-banjo-bolt-hel-aluminium

This connector is ridiculous. Even after you tighten it onto the oil sandwich plate, you can still rotate the connector by hand, so I don't think it can seal properly at all.

In the end, my friend and I both switched to this type of connector, and the problem was solved.


Actually all the other HEL components are of good quality; it's just that connector defective.