GR Yaris My gas lifters

Amanda

Devoted member
Joined
Apr 12, 2022
Messages
66
Reaction score
142
Hi after the Collins meet and seeing Phils car with gas lifters I wanted a pair , so I ordered some from Fensport , only we had a slight problem they don’t fit with the gazoo racing strut brace 🤦‍♀️ So I contacted Fensport who kindly refunded me and told me to keep the lifters for all the trouble it had caused fitting them , well I wasn’t been beaten it’s taken me over two weeks to get them to fit by redesigning the brackets a couple of times and using different ones for the hinge side, I love the way they now look 😎
5953BAD5-211C-4274-95AC-2EB0466932A3.jpeg


7CE0F323-7812-4E73-B7EB-A03543220F48.webp


CDEABD7A-3484-4132-A642-EA31C3D8CA2B.webp


F21CF8AB-AE5E-4D87-A476-D98373496E37.webp


9DAAF614-01FE-4D35-9C36-B8FE37DF0208.webp
 
Well done for sticking at it!

That's how the kits should be sold.

That looks brilliant. 😎👍
 
Thanks everyone here’s a pic of the original fitment that was catching my strut brace

A18E6116-C308-42B2-8448-EB4F03A1210E.webp
 
Indeed, looks very factory.

Would also be interested if you fancy knocking out a few sets. Think many would be, tbh!

One thing though, how is the bonnet closing? Can you still drop/slam it closed, or does it need a push to latch?

With aluminium I'm always wary of it needing a push and buckling the thing. Not so much for me as it's me car, but in the garage etc. 😬
 
Indeed, looks very factory.

Would also be interested if you fancy knocking out a few sets. Think many would be, tbh!

One thing though, how is the bonnet closing? Can you still drop/slam it closed, or does it need a push to latch?

With aluminium I'm always wary of it needing a push and buckling the thing. Not so much for me as it's me car, but in the garage etc. 😬
You drop it as normal , and you have to push it up aswel it’s only the last few inch it goes up itself and holds if that makes sence , Ive seen other ones flying up from quite low which worries me , here’s a pic for an example it’s holding there at that angle but not flying up

I will be telling Toyota when they service it to pull it from the pin thing inside aswell that locks it shut , rather than grabbing the actual bonnet to pull down

732B7CC7-96C8-4879-B37E-046191237E1F.webp
 
GReat job ! I would be interested too... If it's really plug & play.
I like the idea that it lifts the bonnet up higher than with the OEM "stick".
 
Back
Top