Greenthumb
Totally Hooked
You know why?
GR Yaris HJS Downpipe with ECE-approval
- Thread starter Andy R
- Start date
Mines currently out for delivery today. Ordered early December from Tegiwa. Christmas shut down of HJS factory I was told. Was given an ETA of March sometime so was pleasantly surprised to get a DHL notification upon waking today.
It’s arrived! Wow the box is small! Around the same size as a shoe box. Just need to find someone competent in the Kent area now if anyone has any recommendations? Driving impressions to follow..
These people know what they are doing, located near Paddock Wood. https://www.csp-specialists.co.uk/
Much appreciated
I’ll check them outPlease feedback your thoughts on it
If the service says they gotta pull apart subframe and stuff, tell them to dismantle the OEM cat heat shields while its still bolted on the car. That way it can be removed "easily".
Had mine fitted today by JF Automotive in Maidstone. Took them approx 4 hours because they said it was a bit fiddly. Early impressions are that pickup feels more immediate and grunty so that town driving feels better but not had a chance to open her up yet on an open road through the gears. Seems to work well my Eventuri, Legamax, and ECUTek remap.
CerN
Totally Hooked
- Feb 17, 2023
- 337
- 1,097
Had mine fitted today. First impressions are really nice. Definitely a noticeable difference in response/pickup. Pulls a bit harder, and doesn't die out as much at the top end. Feels like the car has been woken up a bit, and had another little level of aggressiveness added.
Didn't seem to be any louder on cold start/idle than it already was with unresonated Milltek, but seems a bit louder when on throttle, and the tone is maybe a tad deeper.
Stock ECU btw. No tune.
Didn't seem to be any louder on cold start/idle than it already was with unresonated Milltek, but seems a bit louder when on throttle, and the tone is maybe a tad deeper.
Stock ECU btw. No tune.
Last edited:
SckSqzBngBlo
Dedicated member
Will it throw a CEL on the stock tune?
CerN
Totally Hooked
- Feb 17, 2023
- 337
- 1,097
No. It is CE approved, so it is a legal mod, and should give similar emission numbers to stock, and uses the stock sensors. It is simply built with higher quality materials to achieve the same amount of filtering with less restriction.
I had my local Toyota dealership fit it, and they had no qualms about doing it, considering it was CE certified. It is viewed the same as any other 3rd party spare part.
Fred
Absorbed member
Now we are waiting for the Gen2 version
Is the DP on the MK2 different from the one on the MK1 ? I knew the backbox was different, but not aware the front section was.
I have read elsewhere that it is different.
It’s not just the back box that is different. It’s the full system.
On the gearbox. So basically the turbo is fixed.
But the downpipe is with two bolts with springs attached to the OPF and allows for some movement.
Have you guys ordered this one from Tegiwa?
www.tegiwa.com
It says Milltek but is it actually the same as HJS 90828000 and there is no difference?
I'm planning to add it to my full Akrapovic exhaust.
Milltek Toyota Yaris GR & GR Circuit Pack 1.6T (OPF/GPF Models Only) 2020-2023 HJS Tuning ECE Exhaust Downpipes Exhaust
All Milltek performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation...
www.tegiwa.com
It says Milltek but is it actually the same as HJS 90828000 and there is no difference?
I'm planning to add it to my full Akrapovic exhaust.
Miltek is the HJS, no difference. Made by HJS and sold by MiltekHave you guys ordered this one from Tegiwa?
Milltek Toyota Yaris GR & GR Circuit Pack 1.6T (OPF/GPF Models Only) 2020-2023 HJS Tuning ECE Exhaust Downpipes Exhaust
All Milltek performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation...
It says Milltek but is it actually the same as HJS 90828000 and there is no difference?
I'm planning to add it to my full Akrapovic exhaust.
I confirm.
I brought the car to pass the Mandatory "TEchnical Control" in June, the HJS downpipe passes the emissions test. Passes as if it were the OE one. Not any problem at all.
