GR Yaris High Pressure (DI) Fuel Sensor Failed on Track

ninjan00dles

Absorbed member
Jun 18, 2023
31
65
18
Just documenting this for others.

Our development car had a high pressure fuel sensor fail midcorner at high rpm on track (Sonoma Raceway) several weeks ago.
Ecutek / ECU did what it was supposed to do - it lost high pressure signal and instantly went into port injection only mode / limp mode and lowered the redline.

Installed a new sensor and all is good again.

CEL was P0190-11


2023 GR Corolla, 12+ track days, 44000 miles (~ 71000 km)
Ecutek w/ flex fuel. Stock fueling otherwise.
 
My 2021 GRY, 102000km (3000 track km) did the exact same thing on a public road, luckily I wasnt overtaking.
CEL, same code, limp mode, hard cut at 2k RPM, those 30km limping home werent a joyride 🤣
Unfortunately wasnt allowed to open the sensor cover, as the workshop had to return it. Covered under warranty.
Could it be related to the increased boost/fuel demands of the Toyota remap done 2000km ago...? 🤔
 
I would not say it's a common issue but its, say a known issue. I think there is a thread on this forum or the other about it.
Keeping one as a spare is not a bad idea. Google the part number to find the best price otherwise you may pay way too much.
 
  • Like
Reactions: Ecsrobin