GR86 GR86 Toyota Mud Flaps and alternatives

Mick said:
Have you drilled the rear bumper? I was going to try 3m tape incase I dont like them.
Click to expand...
How did this go? Thinking of fitting mine with 3M to see how they hold, and only drill if they wear loose.
 
It's all good I'll get some ordered through my dealer but they said they are on back order at the mo...
 
GR86G said:
It's all good I'll get some ordered through my dealer but they said they are on back order at the mo...
Click to expand...
I had front ones fitted but happy to sell the rear's that are unused/unfitted as I only wanted front mud flaps.
 
ianmk4 said:
Rokblokz have a black Friday sale ATM. BFCM25 for 20% off
Click to expand...
Did anyone place an order or planning to in the not too distant future? Hardware for mine was missing 😢
 
Last edited:
GaryG said:
Did anyone place an order or planning to in the not too distant future? Hardware for mine was missing 😢
Click to expand...
Yeah, mine arrived and all looks ok with fittings, but not stuck them on yet. Get on to them, am sure they’ll send some out.
 
I got mine last summer and fitted the front ones, but not the rears. Only because I could fit the front without removing the wheels. Rear wheels need to be removed for fitting there but I haven't got the kit to do it so left them off. They look great and blend I'm with the car well.
 
Check these out as an alternative. Much more discreet:
FX3D Rock Guards

I rock them and love the quality material and also how they have a lot of adjustability.

Current version don't require any drilling of the rear bumper too, which is appreciated.

Here's my winter setup.

1000002592.webp
1000002594.webp
 
Last edited:
I bet that's pretty fun on those size tyres and comfy, do you have any full photos of the car? What suspension setup are you running?
 
Cambman said:
😀 They look good. I like your wheel set-up too, esp the higher tyre side, reducing the risk of kerb scuffs. 👍
Click to expand...

Those where my old WRX winter wheels I just refinished with gunmetal powder coating. They are 16" x 7 or 7.5" discontinued Konig Britelite. Setup works amazingly over here in eastern Canada.
ZN8 said:
I bet that's pretty fun on those size tyres and comfy, do you have any full photos of the car? What suspension setup are you running?
Click to expand...

Fun is the right word. I also own a supercharged S2000 and I much prefer to daily drive this thing.
Suspension is stock apart from H&R springs.

PXL_20241103_191659564~2.webp


That's the summer setup. Konig Dekagram 17x9 +40 wrapped in 225 Hankook RS4.
Painted those wheels silver myself btw. Only comes in black and bronze.

PXL_20241016_031632996~2.webp
 
Blackbird_2k said:
Check these out as an alternative. Much more discreet:
FX3D Rock Guards

I rock them and love the quality material and also how they have a lot of adjustability.

Current version don't require any drilling of the rear bumper too, which is appreciated.

Here's my winter setup.

View attachment 33098View attachment 33102
Click to expand...
Your picture is on their website! does that mean you can get us some discount? :) Having a black car and 245 tyres, my car gets dirty very easily. i might have to get a set of these. Its a shame that my favourite view of the car is the bit of rear tyre that pokes out of / below the rear bumper
 
Just fitted a set of these FX3D mud flaps, the quality is amazing for a 3D printed item, feel & flex just like a sheet of rubber.
Very please with fitting look and quality, and only 6-days from Canada


IMG_7581.webp
 

Attachments

Last edited:
after looking at the various options also ended up going with FX3D mud flaps, as other said come from Canada and think are made to order so mine took around 2 weeks from ordering, with exchange rate worked out around £112. Only fitted this weekend but happy with them so far, straightforward to fit and no drilling required if that matters to you. a few pics
DSCF3906.webp
DSCF3908.webp
DSCF3910.webp
DSCF3913.webp
 
You must log in or register to reply here.
Back
Top