GR86 Brake Caliper Paint

AndyRC

Totally Hooked
Joined
Dec 28, 2021
Messages
2,839
Reaction score
3,334
Location
East Yorkshire
With the calipers looking as though they were robbed off a Corolla or C-HR painting may help make them look more appropriate to a sports car. Has anyone any experience with paint kits 🤔 Looks a cheap option , and not too difficult from the video, to make a significant improvement in the “looks” department 😉


 
Last edited:
I like the idea of this but concerned it would look DIY and then degrade poorly over-time.

I was thinking of trying to tolerate them as stock then getting them stripped and refinished professionally if I couldn't deal with it.
 
I like the idea of this but concerned it would look DIY and then degrade poorly over-time.

I was thinking of trying to tolerate them as stock then getting them stripped and refinished professionally if I couldn't deal with it.
For around £25 I’d be happy to have a go ASAP before the calipers get covered in dirt. If it doesn’t wear well , or looks DIY , then a professional refinish would be the way to go.

On a separate point I always end up painting the bottom of the discs and edges with smooth Hammerite to keep them looking nearly new.

7E7E1130-3746-4B3C-B3D5-92B13FD192C4.jpeg
6505B406-C3D7-4EA3-9FA7-33BC4D62EAB5.jpeg
 
Found these , didn’t know such a thing existed 🤔 I’m not sure which is worse fugly looking calipers that work or brake covers which don’t 🤷‍♂️


A65D8F79-6FAB-4BBE-9593-6D9855D19075.webp
 
I'm pretty sure they are much like the GT86 ones, so they aren't pretty. The trouble is if you paint them, you simply highlight that. As for those calliper covers....
 
Maybe if they were painted or professionally refinished in black they would blend in and you wouldn't notice they ain't pretty.
 
Black should help them blend in behind the wheels. Funny how if you have decent looking brakes folk like them in bright colours 🤔😁
 
Well I'm going to be getting my Calipers painted a bright shade of Yellow with a GR logo on the fronts if there's room. Quoted about £250 for all 4.
 
Reigniting this thread a bit - Took about 4 hours, would've been less if I had more than 2 axle stands.

Foliatec Speed Yellow Kit - About 20 quid on Amazon

Easy enough to use - only tip I'd give is let the paint and hardener mix and then leave it an hour or so, it was so much easier painting the fronts than the backs which I did first as the paint was just too runny.



PXL_20230812_120759112.jpg
 
Think I’ll do mine black with the foliatec kit. Is one kit plenty of paint to do the front and back with a couple of coats?

Presumably this can be done without taking the calipers off?
 
Think I’ll do mine black with the foliatec kit. Is one kit plenty of paint to do the front and back with a couple of coats?

Presumably this can be done without taking the calipers off?
Yeah one kit is more than enough, paint with callipers on, just be careful to keep off the rubber bits and other moving parts, I went for a steady hand approach, you could mask up if you'd prefer.
 
Back
Top