GR86 Axle Stands

KobayashiMaru86

Totally Hooked
Joined
Apr 14, 2022
Messages
2,512
Reaction score
3,403
Location
Swansea, Wales
After some as I'll have bits to fit underneath soon. Always got away with jacks only (got 2) but will need the car fully in the air for some of it as undertrays will need to come off etc. Can anyone recommend ones for our cars and where's best to put them? I'm always wary even jacking on the sills.
 
I just did this so here's my advice and shopping list.

Jack the rear up on the diff, jack the front up on the front crossmember (body colour peice between engine undertray and the underside of the bumper). Use rubber pads on the stands to prevent damage to the sills. Look for 2 notches in the seam at each end of the car and put the stands between the notches.

Amazon IDs (pop them in the search box):
- Stands: B00026Z3E0 (they do a slightly lower 2t version but 3t fits fine)
- Stand rubber pads: B0CM3HQJ15
- Mini ramps: B0CPBW8QLC (possibly not needed depending on how low you are and how low profile your jack is)
 
Last edited:
I just did this so here's my advice and shopping list.

Jack the rear up on the diff, jack the front up on the front crossmember (body colour peice between engine undertray and the underside of the bumper). Use rubber pads on the stands to prevent damage to the sills. Look for 2 notches in the seam at each end of the car and put the stands between the notches.

- Stands: Amazon product ASIN B00026Z3E0 (they do a slightly lower 2t version but 3t fits fine)
- Stand rubber pads: Amazon product ASIN B0CM3HQJ15- Mini ramps: Amazon product ASIN B0CPBW8QLC (possibly not needed depending on how low you are and how low profile your jack is)
Links are broken for me :(
 
Hmm, it looks like it does something wierd with amazon links, will attempt to fix.
 
I went for the quickjack option as I knew they would serve me for the years ahead of safer working around or under cars. 6 years later and I wasn’t wrong. If you have the storage space (hang mine on the wall) you can’t go wrong with them.
 
I just did this so here's my advice and shopping list.

Jack the rear up on the diff, jack the front up on the front crossmember (body colour peice between engine undertray and the underside of the bumper). Use rubber pads on the stands to prevent damage to the sills. Look for 2 notches in the seam at each end of the car and put the stands between the notches.

Amazon IDs (pop them in the search box):
- Stands: B00026Z3E0 (they do a slightly lower 2t version but 3t fits fine)
- Stand rubber pads: B0CM3HQJ15
- Mini ramps: B0CPBW8QLC (possibly not needed depending on how low you are and how low profile your jack is)
Perfect I'll get those ordered.
 
Had an attempt at this today. The two jacks I have don't get the car high enough for me to put the jack stands under with me jacking by the diff. It's also a pita getting the arm in at an angle to actually jack it up. Can someone recommend a jack? Mine are just cheap Hilka ones from Screwfix from years ago so I'm due to replace them as one is looking a bit off.
 
Instead of jacking up the car I used a pair of ramps recently. Admittedly only on the rear, but it drove up them without issue.

I suppose it depends on what work you are planning to do as to whether ramps would be suitable.
 
Had an attempt at this today. The two jacks I have don't get the car high enough for me to put the jack stands under with me jacking by the diff. It's also a pita getting the arm in at an angle to actually jack it up. Can someone recommend a jack? Mine are just cheap Hilka ones from Screwfix from years ago so I'm due to replace them as one is looking a bit off.
I had this exact issue too. Frustrating, especially as I have a nice allot low entry jack. I had also bought fresh new axle stands and rubber supports similar to the ones you suggested.
I wonder if there is a lower axle stand option that woudl work for us.

I think our sill points are freakishly low.

I have the opposite problem with the truck where I need to put a bottle jack on two railway sleepers to reach the frame :ROFLMAO:
 
The jack I got from SGS. Wasn't cheap but gets me up to 535mm using a centre jacking point. Still don't trust the axle stands on the sills so put front tyres under bricks for now but you lose quite a bit of height then when the suspension comes back down. What I may do is jack rear too, put on bricks so the angle isn't as severe, then lift the front again to max and use the stands.
 
Halfords are offering 20% off their 3T Advanced Low Profile jack, and you can stack the 10% discount code. I don't have a trade card to know if that also stacks. Picking mine up later, as the 2T regular jack doesn't get high enough.

 
Back
Top