GR Yaris Wheelnuts for OZ Leggera

[Sturesmyg]

Hi,

Got my OZ Leggera a wile back, but with no wheel nuts. I think the standard ones from the forged are no good on the OZ.

Does anyone know what kind of wheelnuts I need for the OZ ones?

OZ leggera 8x18 ET45

 

[Bronson]

M12 x 1.5, 60 degree tapered. You might find some shaft nuts will give you an extra turn or two, but 8 turns is sufficient.

 

[banzai2]

I got some shaft nuts for mine as I did not like the tapered ones OZ supplied. They only engaged about 7 threads which though theoretically ok did not give me much confidence. If you pay the postage I will send you my OZ wheel nuts, or you can go to https://www.performancealloys.com/ and look for 20x 34mm Black H&R Wheel Nuts, M12x1.5 - B125001MZ5 or the same in silver.

 

[Sturesmyg]

bought these but can’t even start to imagine a tool that will fit in with the wheel nut, they are so big.

So back to the drawing board

 

[Sturesmyg]

I got some shaft nuts for mine as I did not like the tapered ones OZ supplied. They only engaged about 7 threads which though theoretically ok did not give me much confidence. If you pay the postage I will send you my OZ wheel nuts, or you can go to https://www.performancealloys.com/ and look for 20x 34mm Black H&R Wheel Nuts, M12x1.5 - B125001MZ5 or the same in silver.

Thanks for the offer. I’ll look up postage and DM you!

 

[banzai2]

Did you sort your wheel nut issue?

 

[Humptydumptyhadabigone]

Sorry guys, I thought I had replied to this. I have these wheels and they came with nuts. Oz call them 'tuner lug nuts'.

They require a 10 point tool. Oz supplies one which has a hex head and fits a 19mm socket but I bought a specialised tool that the Lotus guys use that goes straight on the 1/2" drive on the breaker bar.

4710 - 10-Point Tuner Lug Nut Socket

10 point bit socket services Tuner Lug Nuts and some import OE Lug Nuts Bit-in-socket design for extra torquing power Deep reach 5" / 125mm long Point to Point: 0.541" / 13.75mm 1/2" square drive

ctatools.com

 

[Sturesmyg]

Sorry guys, I thought I had replied to this. I have these wheels and they came with nuts. Oz call them 'tuner lug nuts'.

They require a 10 point tool. Oz supplies one which has a hex head and fits a 19mm socket but I bought a specialised tool that the Lotus guys use that goes straight on the 1/2" drive on the breaker bar.

4710 - 10-Point Tuner Lug Nut Socket

10 point bit socket services Tuner Lug Nuts and some import OE Lug Nuts Bit-in-socket design for extra torquing power Deep reach 5" / 125mm long Point to Point: 0.541" / 13.75mm 1/2" square drive

ctatools.com

I figured this out myself/through dealer, so now I’m good for winter