GR Yaris MrJ’s Daily Driver

I saw all these amazing photos of GRs fresh out of the detailers, looking incredible and decided I fancied giving it a go myself. Lots of YouTube videos later (thanks Forensic Detailing Channel) and I tested out my new machine polishing skills on my old Yaris (over 100k miles on the clock), which was being passed on to my girlfriend. Ok, ok, I was basically practicing ruining her car instead of my new one :D

View attachment 1343
I was really pleased with how it turned out, so was happy to give it a go on my new car...

First I borrowed a driveway (thanks Dad!), and set to work giving the car a full decontamination from the journey from Japan, a super light finishing polish (Menzerna 3800), and a coat of Gyeon Cancoat, which is a really easy to use lightweight ceramic coating. I don't have a garage so could only use products that can be used in the dry.

View attachment 1334 View attachment 1342
I don't remember any marks on the paint, but there were swirls on the black plastic trim and some bird poo that had etched in. Nothing that didn't come out with a bit of polishing with the DA though.

I fitted MFF mudflaps for protection, covered the underneath in Lanoguard and Bilt Hamber Dynax, PPF panels from @Sticky, and a 13 x 8 rear plate just because, and the finished article looked like this:

View attachment 1335 View attachment 1336

Next, interior stuff...

TRD fake carbon panels and the cupholders, which are the best mod ever:

View attachment 1338

Garmin Dashcam Mini front and rear, hooked up to a Cellink battery. I managed to tidy up the rear cable later and run it through the inside of the bootlid. TGR 3.0 Mirror riser:

View attachment 1337 View attachment 1340 View attachment 1341
Maybe a stupid question but does the Gyeon Cancoat apply a ceramic coating, or is it used to protect / clean an already ceramic coated car?

On their website it states:

Q² CanCoat EVO is the easiest coating to apply you will experience. It is also the best value for money product to protect or maintain your ceramic coated car. Its 200ml allows you to coat or re-apply it over 10 to 15 times!

So am a bit confused!
 
Maybe a stupid question but does the Gyeon Cancoat apply a ceramic coating, or is it used to protect / clean an already ceramic coated car?

On their website it states:

Q² CanCoat EVO is the easiest coating to apply you will experience. It is also the best value for money product to protect or maintain your ceramic coated car. Its 200ml allows you to coat or re-apply it over 10 to 15 times!

So am a bit confused!
It’s their lightest/easiest to use ceramic coating, so I applied straight onto the paint after a wash/decon and light polish. I actually put a coat of their wax on top afterwards as a topper. It’s probably possible to add it on top of their other coatings as a topper.

It has the lowest durability of their ceramic coatings, but doesn’t require 24 hours overnight in a garage etc to cure, if I remember correctly it just needs to stay dry for 12 hours. I would recommend for DIY 👍
 
It’s their lightest/easiest to use ceramic coating, so I applied straight onto the paint after a wash/decon and light polish. I actually put a coat of their wax on top afterwards as a topper. It’s probably possible to add it on top of their other coatings as a topper.

It has the lowest durability of their ceramic coatings, but doesn’t require 24 hours overnight in a garage etc to cure, if I remember correctly it just needs to stay dry for 12 hours. I would recommend for DIY 👍
Thank you. I will invest when mine arrives (if it ever does)!
 
  • Like
Reactions: MrJ
Thank you. I will invest when mine arrives (if it ever does)!
Yeah I’d definitely recommend for a first time, I found it really easy. Best tip I can recommend is to get a few good but not great microfibre cloths for applying and removing, and demote them to crap duties once you’re done, as they won’t be much use for absorbing etc once they have been covered in the ceramic coating.
 
Yeah I’d definitely recommend for a first time, I found it really easy. Best tip I can recommend is to get a few good but not great microfibre cloths for applying and removing, and demote them to crap duties once you’re done, as they won’t be much use for absorbing etc once they have been covered in the ceramic coating.
Makes a lot of sense. I’m due a refresh on microfibres anyway so will work nicely!
 
Thought I’d try out a cheapy carbon gear knob to see if I like it. Pleasantly surprised with it actually, so will see how it goes. I wore all the numbers off on my last Toyota, so would quite like to keep the original in decent condition.

401F2798-E8D0-4769-9ACE-5B9C423E0448.webp
 
Treats!

Hoping @kinboshi can tell me what I’m looking at here 🙂

1AB0E223-910E-49E4-9996-486888EC9B5C.jpeg
 
Last edited:
Treats!

Hoping @kinboshi can tell me what I’m looking at here 🙂

View attachment 1472
Left to right, you've got:
Caramel popcorn
Chicken flavour ramen (noodles)
Chocolate biscuit twig things
Ready Salted Hoola Hoops
But the best out of all of that, are the shrimp flavour crisp things on the right. I ate them by the metric tonne. They say they're high in calcium, so they're basically a health food! 🤣
 
  • Love
Reactions: MrJ
Left to right, you've got:
Caramel popcorn
Chicken flavour ramen (noodles)
Chocolate biscuit twig things
Ready Salted Hoola Hoops
But the best out of all of that, are the shrimp flavour crisp things on the right. I ate them by the metric tonne. They say they're high in calcium, so they're basically a health food! 🤣

Contains whole shrimp with natural shrimp!

So delicious. So it contains calcium.
A variety of deliciousness that you can enjoy the timeless taste and crispy texture Introducing the taste of "I can't stop ♪ I can't stop!"


What a product description!
 
Contains whole shrimp with natural shrimp!
So delicious. So it contains calcium.
A variety of deliciousness that you can enjoy the timeless taste and crispy texture Introducing the taste of "I can't stop ♪ I can't stop!"


What a product description!
They're really moreish, and great with beer!
 
  • Like
Reactions: MrJ
Managed this yesterday. Am I due some sort of verbal warning?

38497751-06E7-443E-B877-322257B8140C.webp

Disclaimer: The engine was already warm and it was a crap weather chug along the dual carriageway. I was actually heading for 50 MPG until I lost the lorry I was sheltering behind.

I have noticed that 4,500 miles in, when I fill up the tank it’s calculating a range of over 300 miles now, whereas it definitely used to always be in the 280 - 300 range.
 
A little February update on what’s been going on over here.

I got bored of the filthy look and decided to give the car a thorough wash and a couple of fresh coats of sealant on the paint. I suspect the old stuff had worn off a bit judging by how absolutely anything within 100m of the car seems to stick to it. I also suspect the local PAYG jet wash I have to use has some strong chemicals in its foam and strips it pretty quickly.

Anyhoo I took the car for a thorough wash, got it home, went over it with Bilt Hamber Cleanser Fluid to get rid of anything left on the paint, and all little tar splodges. Next, I went all JDM detailing and gave it a coat of Soft99 Fusso, as this is regarded as one of the most durable waxes/sealants available.

76E45ADA-72CB-4FA5-B13E-B5A79823BEA5.jpeg 13F4026C-0CDD-4A80-994A-7BD4FA3E6F93.jpeg

It’s amazing how a putting a coating on the pure white paint makes it sharp and crisp again, rather yellowy.

Next job on the list was to swap my MFF mudflaps out for some new ones with printed logos. MFF we’re kind enough to send me a new set asking if I’d carry on taking photos of the car on Instagram for a bit. I’m not usually a logos and brands kind of person, but hey free mudflaps, and also I’m quite happy helping them out and promoting them a bit, as they are a really nicely thought out design.

I mounted them on the slightly higher set of holes this time, and it was a much less fun job with everything covered in winter muck and grit compared to when the car was new! I took the opportunity to squirt some more Bilt Hamber Dynax UC into some more crevices.

I’ve also fitted Bosch Aerotwin wipers as I heard they were an improvement to stock. Will see how they go.

31F09F38-3B47-4C8F-A08C-92F9C131CCC0.jpeg

The paint was been super hydrophobic since the Fusso was put on, so after a night time drive up to the Cat & Fiddle, I popped into my local PAYG jet wash on the way home and gave it a quick blast with just water, before going home.
D7833EFB-0C31-4E49-B957-624D89EA47EF.jpeg
I was really impressed with how the muck fell away, so I think this might be how I try and keep on top of it, with the bonus of being able give the underneath a good rinse at the same time.

So yeah, here I am being a corporate whore:

943F044B-15BA-4CDD-8112-D5048657F96A.jpeg

😏

I’ve invested in a big red sponge and some Optimum No Rinse and am going to try out this rinseless washing malarkey, and will report back.

Next stop, Toyota Parallel Pomeroy @ Silverstone. No I don’t have a entry and yes, I’m last but one on the reserve list, but y’know… Free bacon butties.
 
A 6 month and 6,000 mile update from me :)

The Toyota Parallel Pomeroy was a great bit of fun. It was pouring down and freezing cold, but a free hat, the opportunity to wear some competition numbers, and a couple of parade laps around the Silverstone circuit all made it worthwhile.

C0AAE59E-5C17-473C-BD90-ADC0959BB88C.jpeg 785B58A3-0535-4A3F-965F-201A5FF3D856.jpeg

The only real mods I've made along the way are the Rallye badge on the boot, and the Forge carbon duct in the engine bay. Now I will likely never have the ability to tell whether this makes a difference or not, but I like both the theory and the looks of it.

F32790A1-338C-4166-8213-E8B9AF8B171D.jpeg

Cars & Coffee at Chester Lakes was a great chance to see so many GRs. You certainly wouldn't think they were hard to come by! Nice to meet with a few forum members too. I followed this up with a nice drive over to the Evo triangle, and then a spot of Sunday lunch in the border. I think I'm getting old... :LOL:

6E235F01-4F59-45B8-891C-C1CDCC04ED67.jpeg 98EA08FD-1005-4119-93C2-A12B3304A1DE.jpeg 51F007E0-439C-4232-ABED-278A033DDCCA.jpeg

The following morning was first service time at RRG Macclesfield. I opted to have all the transmission fluids replaced on top of the standard 6 month service. It felt silky smooth when I left. The only issue (apart from the utterly filthy underneath) was that one of my rubber bungs has gone awol. I'll need to get another one and make sure that there hasn't been too much water getting in, I'm hoping it's a recent thing.

1647433479524.png


Lanoguard seems to have done its job over the winter. It does seem to attract dirt and doesn't look particularly pretty, although I'll see how it looks when I get the wheels off, and give it a good clean underneath, when swapping back to stock wheels.

Oh and I picked up Gran Turismo 7, so obviously the first thing I had to do was to create my two real life cars... Tragic... :LOL:

D91350BE-97C0-4158-BD59-9105F34298E7.webp BB8F9956-C98D-4B62-8D4D-E81359C8D05C.webp

Next up, Japfest and a spring road trip across Ireland 🇮🇪
 
Crikey, I think this is due an update.

So, Japfest feels like a long time ago! It was great to meet a whole load of forum members, and there was a sea of GRs there. I also managed my record MPG on the drive down, much to @kinboshi ’s bemusement. It was bad for my wallet though, as I had intake noise envy…

AD426BDA-E967-4F87-93D9-52DD298BBA66.jpeg 1171CBA1-7C38-472B-BA0C-8F7F2E8C3C8E.jpeg2F1C9D29-CF3C-40C9-92D2-C72D0861B5CF.jpeg

The next job was to give the car a good clean underneath and swap from winter to summer mode. I managed to secure a small discount on an Eventuri too, so that was fitted at the same time. I’ve been playing with the whoosh noises ever since.

D9145602-FB53-4191-8375-6E76E6D21652.jpeg B7C58B91-67C8-4099-861F-FD3E5003AAD0.jpeg

On went the stock BBS wheels too, and then a drive round North Wales with a few forum members. The ride is a lot better on the light stock wheels, and the PS4S so much more lively than the Crossclimates. A welcome change, but I was finding it hard to get used to the look of the car again, it felt like someone else’s 😆

01FDFE64-738D-4A01-9A86-DE439382B31C.jpeg

I managed to get some improved transport plugs, which are quite a lot sturdier. Also a few bits arrived from an Amazon Japan order, it’s worth a look, there are a few interesting little bits on there.

BFBC0AB0-C37E-4E20-A4DA-21F39A45A84E.jpeg6E4A17CF-742C-470E-8CA6-B05FBFCC9655.jpeg162056D2-F1E9-4465-BAFC-3499843A8C7B.jpeg8163ABA0-3CEE-4F02-ACF1-175319CBCB20.jpeg88691363-8CCC-4307-8158-624C2F6BA5CC.jpeg

The slot in armrest is great for longer journeys, but can be lifted out when needed. A GR86 gear knob and some fake carbon protection that roughly matches the TRD kit, and the matching HKS floor mats. They are nice, but I’m finding they are shedding a lot of their pile, unlike the stock ones.

Finally, after a 6 month wait, the HKS Hi-Power Spec L exhaust arrived. I added the carbon tips, and it sounds pretty meaty now. So much so that I added a layer of Dynamat onto the boot floor to reduce the bass vibrations which do travel into the cabin. It’s spot on now, but definitely not as subtle as the Legamax…

ABA0265F-5DB1-4184-AF5F-55CFCAE95BCB.jpeg354D1F97-3BA5-4232-9695-BC41DE15DBB5.jpeg
The carbon engine cover is an absolute extravagance, but meh, I absolutely love the look of the engine bay now.

And on to Simply Japanese at Beaulieu. I had a couple of days in Sussex beforehand, and then on to the show. It was a really good event, and a great museum there too.

C2DD0ECD-F8A3-414E-81A5-AFDC96AFDD6F.jpeg

And yes, the all seasons and Speedlines were back on the car. I had hatched a plan to buy another set of wheels and sell the BBS that were on the car, but as with many things nowadays, they have been delayed. Not sure what I’ll do about that yet…
 
Back
Top