GR Yaris Black GR04. . . Padeswood roundabout Mold 2pm

CRM

New member
Joined
Oct 8, 2022
Messages
17
Reaction score
12
Spotted, not sure if it was a CP car but it had some nice tasteful dark gold wheels.
I was in the old Mk1 Focus RS waving - pure chance i used that today and not my Black CP.
 
Spotted, not sure if it was a CP car but it had some nice tasteful dark gold wheels.
I was in the old Mk1 Focus RS waving - pure chance i used that today and not my Black CP.
Wasn’t me, but just posting to express jealousy towards the mk1 RS!
 
  • Like
Reactions: CRM
Wasn’t me, but just posting to express jealousy towards the mk1 RS!
Compared to the Yaris it really does feel an old car now.
Its "nippy" alright but not in the same league as the GR and while firm ride it also can get a bit flappy at speed like the Golf R unlike the GR
However it does certainly command an image and have a road presence.
A real rare sight on todays roads yet it looks so right and a future classic without question.
d991c08d-a041-465b-867c-fc00351e0786.webp
 
Compared to the Yaris it really does feel an old car now.
Its "nippy" alright but not in the same league as the GR and while firm ride it also can get a bit flappy at speed like the Golf R unlike the GR
However it does certainly command an image and have a road presence.
A real rare sight on todays roads yet it looks so right and a future classic without question. View attachment 16486

Looks great. Seriously regret never having one, especially when it was possible to pick up a good one for around £10k 😭

The closest I got was ordering the brochure when it was new. Came as a presentation pack with separate pull out cards. They don’t make them like that any more!
 
Looks great. Seriously regret never having one, especially when it was possible to pick up a good one for around £10k 😭

The closest I got was ordering the brochure when it was new. Came as a presentation pack with separate pull out cards. They don’t make them like that any more!
Problem is, all those "good ones" are rotten as a pair now.
Mine has done 46k miles now, and after 2 years of storage we dragged it out pre covid and the rot was starting to set in.
What started out as a minor hole in both sills and light scabbing on the wing lowers - actually turned out to be much worse and even a patch job was big money. so spending "good car" money as you put it on the cars resto was a bitter pill to swallow at the time. however its safe to say now that rot wont kill this car and #4400 will go on for many years to come without needing metalwork or paint hopefully.
Issues on these is sill and wing bottoms. No proper sills available, so most bodge some 2 or 4 door sills with some bending, but all are made from thin tin and could be much better. these were made and pressed from scratch using far thicker grade steel.
Wings for the RS are unique, so again lowers all needed making from scratch where as rear arches can be fabricated from genuine OE standard panels using the bits you need.
Sill covers are a nightmare to remove and often snap and no replacements available, so you can see quickly that a decent bodyshop doing sills and arches and wing lowers and surrounding plus paint can easily got into 10k plus
Worth it though and i suspect following on with other RS models, it really wouldn't surprise me if the old Mk1 RS will easily be north of £40k for a car similar to mine
 
Problem is, all those "good ones" are rotten as a pair now.
Mine has done 46k miles now, and after 2 years of storage we dragged it out pre covid and the rot was starting to set in.
What started out as a minor hole in both sills and light scabbing on the wing lowers - actually turned out to be much worse and even a patch job was big money. so spending "good car" money as you put it on the cars resto was a bitter pill to swallow at the time. however its safe to say now that rot wont kill this car and #4400 will go on for many years to come without needing metalwork or paint hopefully.
Issues on these is sill and wing bottoms. No proper sills available, so most bodge some 2 or 4 door sills with some bending, but all are made from thin tin and could be much better. these were made and pressed from scratch using far thicker grade steel.
Wings for the RS are unique, so again lowers all needed making from scratch where as rear arches can be fabricated from genuine OE standard panels using the bits you need.
Sill covers are a nightmare to remove and often snap and no replacements available, so you can see quickly that a decent bodyshop doing sills and arches and wing lowers and surrounding plus paint can easily got into 10k plus
Worth it though and i suspect following on with other RS models, it really wouldn't surprise me if the old Mk1 RS will easily be north of £40k for a car similar to mine

Bloody hell, I didn’t realise they rotted. That’s pretty shocking for a low mileage 2002 car. I’ve got a 2000 Boxster S with 63k miles and that’s absolutely solid. Only thing I’ve had to treat is some road rash in the wheel arches. Yet mine will never be worth £40k…or even £10k 🤣 I’m sure you’re right about mk1 RS long term values though. The Ford fans pay big money for old cars.
 
Compared to the Yaris it really does feel an old car now.
Its "nippy" alright but not in the same league as the GR and while firm ride it also can get a bit flappy at speed like the Golf R unlike the GR
However it does certainly command an image and have a road presence.
A real rare sight on todays roads yet it looks so right and a future classic without question. View attachment 16486

I was fortunate many years ago to do a track day in one that had been prepared by Ford Germany to compete in an endurance race, Nurburgring 24-hours I think.

God it was an awesome car, I've never experienced anything like it since. Road cars just don't compare to a factory prepared racing car.

I've lusted after one ever since, but things haven't turned out so far! I'd love to know what happened to that car, or it's history, but I've never found anything.

x-factor-scaled.jpg
 
Back
Top