All models All DIY Detailing Things

Any products or tips for removing epic bird s**t in between washes?
I spray the s*** with quick detailer, put a paper towel on it, soak it, let it sit for a minute and wipe it off. No scratches and no wiping effort.
 
Today I found that the Poorboy's QD+ detailer spray and my silver paint are a happy combination.

I've used the QD+ before on darker cars and wasn't blown away by it - it seemed a bit 'smeary' and left a slightly hazy finish and was a little too much like hard work for a supposedly "quick" product.

However on the silver it went in and off very easily and left a lovely shine.

Product link

I assume it would work well on the white as well as the silver.

I've also put some more Poorboy's wheel sealant on which I very highly recommend.

IMG_20230619_183045613_HDR.jpg


IMG_20230619_182812038_HDR.jpg


IMG_20230619_182830856_HDR.jpg

IMG_20230619_192409161_HDR.jpg
 
Last edited:
Any products or tips for removing epic bird s**t in between washes?
Water, water and then a bit more water. Once it's soaking wet and rinsed off I'll usually apply some QD, PPF Maintain or similar. I never contact/rub/move the poop whilst it still has any adhesive properties. Fortunately Ceramic Coating and PPF are comrades at arms here. I once had a seagull poop that had even managed to 'etch' the PPF on my bonnet! The previous Waterwall and product routine still seemed to leave a dull patch when viewed at a certain angle in the sunlight, so in the end I decided to see how 'self-healing' the PPF actually was ... a few minutes with a hair drier had me dancing on the driveway - you beauty! I could actually see the stain disappear before my eyes.. Sorted our Perry ;)
 
Water, water and then a bit more water. Once it's soaking wet and rinsed off I'll usually apply some QD, PPF Maintain or similar. I never contact/rub/move the poop whilst it still has any adhesive properties. Fortunately Ceramic Coating and PPF are comrades at arms here. I once had a seagull poop that had even managed to 'etch' the PPF on my bonnet! The previous Waterwall and product routine still seemed to leave a dull patch when viewed at a certain angle in the sunlight, so in the end I decided to see how 'self-healing' the PPF actually was ... a few minutes with a hair drier had me dancing on the driveway - you beauty! I could actually see the stain disappear before my eyes.. Sorted our Perry ;)
Found a poop on the rear 1/4 which couldnt have been there more than a day, not one of those berry infused purple ones just a normal plop, wiped off with some QD and its still left an etch on the paint! Will need a bit of DA polishing to resolve I think, never had any issue with other paint but as per another thread the paint on the 86 is basically chocolate!
 
Just got this quote from my local Invisifilm dealer

To supply and install XPEL Ultimate Plus PPF to the bumper, bonnet and wings it would cost ยฃ990 + VAT

Any thoughts?
 
Just got this quote from my local Invisifilm dealer

To supply and install XPEL Ultimate Plus PPF to the bumper, bonnet and wings it would cost ยฃ990 + VAT

Any thoughts?
That's good, for comparison my quote for "Xpel ppf install on full front end including headlights and mirrors" was ยฃ1300 inc VAT
 
Just got this quote from my local Invisifilm dealer

To supply and install XPEL Ultimate Plus PPF to the bumper, bonnet and wings it would cost ยฃ990 + VAT

Any thoughts?
I paid ยฃ1100 for XPEL all in for front bumper, lights, wings, bonnet, wing mirrors and A pillars. While I was at it had the rear bumper done . Previously had the side skirts done which I'd recommend highly!
 
IMG20230708095925.jpg


This really annoys me. One day of rain and the car's dirty like this. I have more work with it since it's been ceramic coated than without a coating. I constantly have the dirtiest car of the street yet nobody ever washes their car. This is really something that's being missed as a ceramic coating negative... If they make a coating that sheets I'll be the first customer, I don't get the beading craze.

If anyone has a solution to this I'm all ears ๐Ÿ™‚
 
As much as black is lovely when itโ€™s clean, itโ€™s a buffer to keep that way, bought black once never again! Something light like silver you wouldnโ€™t notice one bit
 
It gray :) never buying a black car again either. Unless it's a garage queen.
 
If anyone has a solution to this I'm all ears ๐Ÿ™‚
I feel your pain. It's like the rain collects every ounce of atmospheric dust just to plop it on your car. How about an Ultimate Outdoor Car Cover from Classic Additions? I had one on my Hyundai Kona N and I've already bought another ready for my GR86. Be aware that they can be a slippery little sucker to put over a clean Ceramic Coated Car - I used to put it in the centre of the roof and unfold it (like wedding cake in a hankie) bit by bit so that it didn't slide off the car. Reverse procedure to take off. Getting it back in the bag is another art form :unsure:

Under_Cover.webp
 
I feel your pain. It's like the rain collects every ounce of atmospheric dust just to plop it on your car. How about an Ultimate Outdoor Car Cover from Classic Additions? I had one on my Hyundai Kona N and I've already bought another ready for my GR86. Be aware that they can be a slippery little sucker to put over a clean Ceramic Coated Car - I used to put it in the centre of the roof and unfold it (like wedding cake in a hankie) bit by bit so that it didn't slide off the car. Reverse procedure to take off. Getting it back in the bag is another art form :unsure:
I use my car way too frequently to put the cover on each time ๐Ÿ™‚ And when it does get sandy or dusty, rubbing that cover over it can't be good, I need a garage ๐Ÿ˜”
 
View attachment 18208

This really annoys me. One day of rain and the car's dirty like this. I have more work with it since it's been ceramic coated than without a coating. I constantly have the dirtiest car of the street yet nobody ever washes their car. This is really something that's being missed as a ceramic coating negative... If they make a coating that sheets I'll be the first customer, I don't get the beading craze.

If anyone has a solution to this I'm all ears ๐Ÿ™‚
I've noticed this at times with some rain, but not all of it.
With ceramic coating I find that fallout remover & snow foam works really well at removing 90% of dirt when washing.
 
And when it does get sandy or dusty, rubbing that cover over it can't be good
A cover should only ever go on a thoroughly clean car. Once Iโ€™d prepared mine for a show it was on with the cover until show day. Same in the Winter; full detail, dry, final coats and on with the cover. Last year it went to bed in November and came out of hibernation in April looking as good as new.
 
  • Like
Reactions: WpR
Back
Top