Search results

I'm going to get rid of my Braids. Custom GR size, 18*9 ET40 60.1CB. Tyres are 255/35 AR1s that have an afternoon at the ring on them. Wheels have TPMS that work cloned from OEM ones. Really good condition, hardly any balance weights and I can only find 3 stone chips worth photographing. I...

I think I'm going to get rid of my Braids. Custom GR size, 18*9 ET40 60.1CB. Tyres are 255/35 AR1s that have an afternoon at the ring on them. I also have 4 more good for a couple of track days that the buyer is welcome to at the asking price - they gotta be worth 50 quid each. Wheels have TPMS...

Hi all, after winter running OEM size I think I've decided I want to go for the smaller, lighter setup for track use in the dry. 235/40 on an 8j et 35 would be perfect. If anyone is looking to trade up to an all out grip setup I have a nice set of 9j ET40 braids wit sensors and less than half...

I've got the @EBC Brakes discs and a fresh set of RP1 pads on today. They are a perfect fit and allow you to get titanium shims in when it's all new. The cooling vanes are much wider than OEM, they are 1kg lighter, all the go rusty bits are black and you can just replace the rotors on your...

Don't use these now. Feel bad binning them. £10 delivered. All fixings are there and just one weird little burn mark which I never noticed when fitted and only did now giving them a quick clean.

Having a clear out. Have so many full meat spares I don't need these used ones. Xp8 is a great compound on the Yaris. Not over the top like the 10s. Very hard wearing, the best stopping power of any pad I've had on it. Do run warm so advise shim use. Fronts used less than 3mm, rears about 1mm...

Having a clear out. Collection prefered but can post for say £10 each. £50 each. Front has some white powder coat chips from when you torque down the nuts that you could touch in. I have new/untorqued nuts I'll provide. Rear is not powder coated.

I got the cage in today. I thinks it's a really neat design and looks properly OEM+ Big thumbs up from me for SW Motorsports. Got it on a pallet next day.

So I'm putting together a little setup but I've not done this before. With your basic base plate, side plate, 290mm side mount solid seat as below where does the buckle go? Do I use the one off of the OEM seat? Do I need new? If new what about the warning light? Does the side harness go to the...

So I'm cracking on with my nurburgring prep. Changed brake pads and fluid, changed the oil, tightened everything up that had come loose and that's when I noticed I'm missing a clip on the rear brake line. I phone all the autofactors with no joy so my poor girlfriend's palette knife become a...

I'm staying over near the waterfront for a meeting tomorrow. Dean

The weather today spurred me on to give the underneath of the car a clean and give everything a check over before the track days kick off again.

Hey everyone. For those of you who migrated over from the other place you may remember we come up with some titanium brake caliper shims after I melted my seals. Well my track day buddies have asked me to make some for the Clios out there and there may be an opportunity to run a few more GR ones...

.... before attempting to recreate my 800 post members cars thread from gr-yaris. Some exciting things happening to the little zunussi over the winter...