Recent content by TLS

  1. TLS

    GR Yaris (Gen 2) Cusco rear LSD vs. Quaife rear LSD

    What is the pn for your diff? Just out of curiosity. I’m running mine on 100% Type RS 1.5 1C8-C15
  2. TLS

    GR Yaris (Gen 2) Cusco rear LSD vs. Quaife rear LSD

    I have Cusco 1.5 way and no noise what so ever. Except tight turns at parking lot, but thats just wheels slipping.
  3. TLS

    GR Yaris Cusco rear LSD assembly & differential removal

    Sure needs some force and proper prybar to pop axles out. Goes back in much easier. I read some where that threads on axle/hub mountin breaks easily since there is lock mechanism in hub/axle nut. Did you get it out OK?
  4. TLS

    GR Yaris Cusco rear LSD assembly & differential removal

    I think there is no oil in ITCC
  5. TLS

    GR Yaris Cusco rear LSD assembly & differential removal

    No issues with lsd. Great performance upgrade. You can definitely feel difference or it feels same as with racing pack. Came to see what oil I put in. Time for 3rd oil change. Lets see what comes out with oil.
  6. TLS

    GR Yaris Cusco rear LSD assembly & differential removal

    Thanks! Starting is the hardest part. I had diff in the shelf for over a year. Forgot to mention some tips that could be useful. WSM requires some special tools, but you can do without. 1. Backlash measurement -Diff rear carrier is good mounting place for magnetic dial gauge stand since it's...
  7. TLS

    GR Yaris Cusco rear LSD assembly & differential removal

    Shimming the diff. You need to measure backlash between gears. Bit of pain since you need to do it through oil fill hole. WSM states 0.13 to 0.25 mm backlash. Also gear pattern needs to be inspected with some colour. I used some old oil paint. Plenty of good instructions in internet. WSM...
  8. TLS

    GR Yaris Cusco rear LSD assembly & differential removal

    Changed Cusco LSD to GR yaris last week. Removing differential was quite easy on jack stands. - Muffler out. - Rear sway bar removed from mounts. Would have been bit easier if I would have removed it completely but it was pretty tight on tie rod. - Open 4 prop shaft nuts from ITCC. Before...
Back
Top