Recent content by Fred

Where can I find a DIY instruction for the oil change? The quantity to change should be approx. 2 Liters. This oil is a good alternative from Italy: https://pakelo.com/en/products/car/atf-dx-vi

ACME in Italy also spent almost 1 day. Same here: firstly on the dyno and then on the road. Impressive result with 351 / 475 :cool: on the MK2 DAT

Thanks for your quick reply Robert! So I won't change the filter...

Hi Robert, can you indicate where to buy the Aisin or Eneos transmission oil and how much oil you did fill in. There is no filter to change, right? Thanks and best regards Fred P.S. I just found a source: https://www.ebay.de/itm/175921087330

This info is interesting!

Has anyone here already done an oil-change of the automatic gearbox? I think Toyota's recommendation to do it after 40K km is too late, especially if you have a tuned car :cool: Thanks for input!

This is the 3 cylinder motor, "just" not mounted in the front. They first test the mid-engine concept with the 3 cylinder - later with the 4 cylinder.

What a super car also in the deep snow!

I have to check.

The reason for the noise was that the initial torque of the LSD was set to 100%. Putting it to 60% the noise has almost disappeared.

It's normal and nothing can be done about it, except opening the door sloooowly.

How's the Quaife in comparison to the original Torsen?

Thank you, that sounds comprehensible.

Yes, the last two changes were quite clean. I will check better the next one.

Thanks! The not correctly performed shimming is also my suscpicion. I will have to control it.