Recent content by cdruk

I just turned mine off in the stereo settings. At the same time, I managed to use techstream for other stuff using an aliexpress cable and software. Just choose a 2021 YARIS GXPA16 G16E-GTS model and it works fine

I have it and it is amazing! Easy install and so quick and easy to get the ISA and lane assist off. I strongly recommend it. BTW, it also disables the beeping from the handbrake during the first 5 seconds of engaging it.

I had this problem on my gen 2 after installing camber bolts. You need to clear it with tech stream. I ordered cable and software off Ali express for about 13€. You can tell techstream it’s a gen 1 and it works fine (techstream doesn’t know what a gen 2 is). Anyway, it is not enough to clear...

I would rate is around a 5-6. The most complicated aspect is removing the plastic trim on the side of the drivers seat with the height adjustment handle. The rest is quite straight forward, you just need to take your time.

Check you have the cables arriving at the seats first and also behind the center console for the switches

As above, I retrofitted heated seats and wheel on gen 1 and gen2 car 2, pics under the seats: This is my gen 2 seat. The white connector with no cable is what you have with no heated seat elements, you remove that and when you install the heated seat elements, you replace it with the black...

In France there will only be 1 ultimate edition available by lottery for 120,000 euros including ~56k inCO2 tax. The UK tax is cheap….

Btw, I have gen 1 switches I can sell if anybody wants them.

I retrofitted heated steering wheel and heated seats on my gen1 circuit pack and gen2 car. It is a French market car and the wiring from behind the dash to underneath the seats is already in place. This means for the install you just need to install and connect the heated seat cushions under...

Thanks for sharing your journey so far!

If you want something discreet that is fit and forget there is fitcamx

Looks nice, but quite pricey… what other gen 2 parts are you planning ?

I would have expected a bit more given the Japanese cars have 300 stock. I suppose you have the gpf still in place?

Thanks for the video! With the valve open it looks like you would get banned from quite a few circuits 😅

Will be interested to hear more feedback on the intake in due time