GR Yaris What warranty jobs has your car needed?

Same for me, mine is 'better' but it isnt as nice as everyone else says their gear change is. When cold its worse than warm, but even warm 1-2 and 2-3 you can feel it very slightly crunch into gear. Doesnt fill me with confidence as many in Aus have had gearbox claims knocked back for popping out of 2nd as it seems ToyAus just blames the owner for poor gear changes. Im on just under 5000kms now.
mine is quite temperature related - if cold it can be really slow but as warms up it is rather ok.
As your km's are still low it will improve after few miles.
 
I'm impressed that they replaced your calipers, considering the absolute hammering you must give them.

Backs up their claim to be happy with track use. Kudos to Toyota for that.
Yep I didn't even push them. I booked in to pay for them to change the seals.
 
17 months, 14 000 miles, no track days, Drive Limits day but mostly steady driving about with the occasional blast and nothing to report😀😀😀
 
  • Like
Reactions: MrJ
... before i have changed oem torque mount it was near impossible to have a smooth gear change, specially downshift....

Similar experience here. A smooth downshift, especially to 2nd and 1st was near impossible. Nothing in my technique or any other factor that I could identify as the cause. All seems to have gone once I replaced the torque mount and polybushed.

Now that I got that sorted, I think I want to experience 9:57 of this:
 
Oh and I forgot, Ive also had the 'hollow clonk' on reversing and turning the wheel. Its not brake pad related, its something in the drivetrain.

I mentioned it to the dealer's GR Tech and he said they would tighten the wheel bolts, suspension bolts and the driveshafts* at the last service (1 year old, 3500kms). When I got it back it seemed to clonk more loudly when it did clonk, but it did it less. Its since seemed to go away... maybe i should be more worried by that than the clonk being there?! lol.

* - I know people have since suggested its one of the gearbox mounts...

I think my main issue is the dealers to be honest. The first was totally useless and didnt want someone who knew about cars there. I wrote it up in my thread, but it was one of the worst service experiences Ive ever had. The 2nd service was better at another dealer as they have a GR Tech, but he's really an office guy most of the time and the service itself was done by an apprentice (welcome to main dealer servicing! lol), he only did work to diagnose and test the gearbox fix etc.

I specifically asked them to not pump my tyres up to 40+PSI this time round, ie like how it was delivered and how the 1st service tech did it. The GR Tech agreed and said that would be annoying for any owner and was appauled by the first dealers shoddy work. But... while driving home I could feel the car didnt feel right, and lo 'n behold the apprentice that did the work didnt follow the specs in the door jam of the car (its right there! so easy to see!) and they were over filled yet again. The next day I called the GR Tech to let him know and he wasnt happy considering we chatted about that very issue and said he'd talk to the guy, but yeah, well... doesnt inspire confidence...

...And I was right... What I didnt realise until I next washed the car, was that while I'd wandered around to the big door of the service bay at one point while waiting for my car and watched the apprentice torque up my wheel nuts was that he didnt actually swap the wheels round like it says on the service schedule. Its very obvious with the brake dust stuck to the wheels that the rears on my car have only ever been on the back.

All this makes you wonder if they did manage to use the right oil... and of course my invoice reflects some other oil as the right oil is never in the system for them to pick... why is that then Toyota if its a product you actually sell and use?

My invoice for the last service also does not mention what they did to mitigate my gear change issues, so I have no record that they even did warranty work on the car for it. Not useful if i need to combat ToyAus later sadly.

As has been said countless times, Toyota has moved into a market where owners are more discerning and as such they need to change. You cant just sell cars like this and expect people not to care about their vehicle like 99% of Camry drivers etc.
 
Oh and I forgot, Ive also had the 'hollow clonk' on reversing and turning the wheel. Its not brake pad related, its something in the drivetrain.

I mentioned it to the dealer's GR Tech and he said they would tighten the wheel bolts, suspension bolts and the driveshafts* at the last service (1 year old, 3500kms). When I got it back it seemed to clonk more loudly when it did clonk, but it did it less. Its since seemed to go away... maybe i should be more worried by that than the clonk being there?! lol.

* - I know people have since suggested its one of the gearbox mounts...

I think my main issue is the dealers to be honest. The first was totally useless and didnt want someone who knew about cars there. I wrote it up in my thread, but it was one of the worst service experiences Ive ever had. The 2nd service was better at another dealer as they have a GR Tech, but he's really an office guy most of the time and the service itself was done by an apprentice (welcome to main dealer servicing! lol), he only did work to diagnose and test the gearbox fix etc.

I specifically asked them to not pump my tyres up to 40+PSI this time round, ie like how it was delivered and how the 1st service tech did it. The GR Tech agreed and said that would be annoying for any owner and was appauled by the first dealers shoddy work. But... while driving home I could feel the car didnt feel right, and lo 'n behold the apprentice that did the work didnt follow the specs in the door jam of the car (its right there! so easy to see!) and they were over filled yet again. The next day I called the GR Tech to let him know and he wasnt happy considering we chatted about that very issue and said he'd talk to the guy, but yeah, well... doesnt inspire confidence...

...And I was right... What I didnt realise until I next washed the car, was that while I'd wandered around to the big door of the service bay at one point while waiting for my car and watched the apprentice torque up my wheel nuts was that he didnt actually swap the wheels round like it says on the service schedule. Its very obvious with the brake dust stuck to the wheels that the rears on my car have only ever been on the back.

All this makes you wonder if they did manage to use the right oil... and of course my invoice reflects some other oil as the right oil is never in the system for them to pick... why is that then Toyota if its a product you actually sell and use?

My invoice for the last service also does not mention what they did to mitigate my gear change issues, so I have no record that they even did warranty work on the car for it. Not useful if i need to combat ToyAus later sadly.

As has been said countless times, Toyota has moved into a market where owners are more discerning and as such they need to change. You cant just sell cars like this and expect people not to care about their vehicle like 99% of Camry drivers etc.
The clunk is common don’t think it’s anything to worry about
 
The clunk is common don’t think it’s anything to worry about
I think Id rather know what the clonk is before I ignore it.

Kind of related is that Subaru and Toyota have had to recall a bunch of Toyota built electric cars in the USA recently as their wheels fell off... yes literally. It appears they the wheel nuts were not torqued up enough to cope with the vibration. Something I do worry about with our cars as its possible to overtorque and ruin the studs on a GRY as was shown early on.

Anyway, we all differ I guess and weird noises from the suspension on new cars are not something expected in 2023 imho. Im not after the GRY being a limo, but loud clonks when manoeuvring are often the tell tale of a problem.
 
Last edited:
Creo que prefiero saber qué es el clonk antes de ignorarlo.

Algo relacionado es que Subaru y Toyota han tenido que retirar un montón de autos eléctricos fabricados por Toyota en los EE. UU. recientemente porque se les cayeron las ruedas... sí, literalmente. Parece que las tuercas de las ruedas no se apretaron lo suficiente para hacer frente a la vibración. Algo de lo que sí me preocupo con nuestros autos es que es posible sobretorsionar y arruinar los pernos en un GRY como se mostró al principio.

De todos modos, todos diferimos, supongo, y los ruidos extraños de la suspensión en los autos nuevos no son algo esperado en 2023, en mi humilde opinión. No busco que el GRY sea una limusina, pero los ruidos sordos al maniobrar son a menudo el indicador de un problema.
Hello soy de España y tengo el mismo problema que tu, si tuvieras más información me gustaría saberlo para llevarlo a la concesión.
 
Back
Top