Recent content by Reyanth

  1. Reyanth

    GR Yaris Gear position + CAN data Arduino project.

    I did a thing! A little adjustment is required but, fits like a dick in a hand.
  2. Reyanth

    GR Yaris How I upgraded it: Aftermarket speakers, sub and amps on JBL system.

    Little update on the Audison DRC MP installation.. Got my hands on a 3d printer lately and decided to make a bracket for the DRC. Installed it on the middle-left air vent under the stereo, pretty much without making any nasty holes on the dash. (on hole inside the vent behind the carbon...
  3. Reyanth

    GR Yaris Gear position + CAN data Arduino project.

    A little update today. Had a OLED frame test print 1 done and it seems I got the measurements about right. Moving onto the test print 2, with 3 screens and a bit more frame.
  4. Reyanth

    GR Yaris Gear position + CAN data Arduino project.

    About the linear sensors, in theory: yes.. In practise, not so sure.. As they are linear it would be possible to just use two sensors (if they work within the needed distance). Also attaching things to the cables is a bit tricky, since the other at least moves a little on 3 axles...
  5. Reyanth

    GR Yaris Gear position + CAN data Arduino project.

    I'm planning on a ver.2 of the whole hall sensor bracket thingy, but perhaps with optical switch modules instead of hall's and 3d printed frame.. I can share the 3d print model as soon as I get it done and fitted and worked out the kinks, as well all the bits and bobs that are needed in case you...
  6. Reyanth

    GR Yaris Gear position + CAN data Arduino project.

    I was bored one day and I decided to start a arduino project for the GR. I really wanted to get a display to show gear position (and yes, I know this can be done via can bus) but, I really wanted to use something mechanical and with more faster response. So, I did some research how tackle to...
  7. Reyanth

    GR Yaris CSR-automotive aero bits

    Could also work in car's colour. Was thinking of painting the CSR parts pearlwhite myself.
  8. Reyanth

    GR Yaris CSR-automotive aero bits

    Thanks for the tag Onehp. And yeah, I have the front, side and wing lips. (the other CSR stuff looked kinda funky so I skipped those) Also, if you need/want more photos on different angles of the CSR's or have any other questions concerning them, lemme know. As for what comes to CSR parts, I...
  9. Reyanth

    GR Yaris Blackhood from Finland

    Been swapping this and that lately, the latest being CSR-Automotive front lip, side skirts and rear wing. Kinda hassle to update all the forum threads etc so, you can check the project photos from: https://www.instagram.com/rey4gr/
  10. Reyanth

    GR Yaris Show us your aftermarket wheels.

    Like GRunt and Spaceman say, they usually come with own nuts and are different from toy-nuts.. Typical "accorn" type nuts will do. ..just for example:
  11. Reyanth

    GR Yaris Show us your aftermarket wheels.

    Oz Ultraleggera's in custom satin bronze.
  12. Reyanth

    GR Yaris How I upgraded it: Aftermarket speakers, sub and amps on JBL system.

    8. Subwoofer bracket Summer vacation is here, had time to fiddle up the bracket for sub. Some aluminium bar 30x4mm and couple bots, nuts, washers and screws. I wanted the boot to be practical so I can access the bottom part if needed etc. Now the sub is off the way, and the rear seat also flips...
  13. Reyanth

    GR Yaris How I upgraded it: Aftermarket speakers, sub and amps on JBL system.

    JBL is improvement over the normal one, but I just wanted more. I installed these same speakers and sub to my 86 couple years ago and.... it's so hard to go back to OEM's after. :rolleyes:
  14. Reyanth

    GR Yaris How I upgraded it: Aftermarket speakers, sub and amps on JBL system.

    5. EQ Tune time! After all the manual labour stuff, have been spending couple days to just finding a decent tune to the EQ. With Audison amp you it's easy to set distances etc. cause you can do that with a laptop on the fly. (Some other brands prolly have similar softwares too, and no, Im not...
  15. Reyanth

    GR Yaris How I upgraded it: Aftermarket speakers, sub and amps on JBL system.

    Helloes, I recently swapped my JBL speakers and amp to aftermarket 2.1 system and I thought I'd share the info I gathered. Sorry for advance that I'm not too techsavy and my native language isn't English so, try to bare with me. đŸ˜… I ended up removing all 8 JBL speakers, replacing them with...
Back
Top